Installing a beaded pool liner is not as difficult as it may seem. With a few tools and some patience, you can have your liner installed in no time. Here are the steps to take:

1. Make sure the surface of your pool is clean and smooth. Any rough spots should be sanded down so that the liner will have a flat surface to sit on. 2. Position the liner in the pool so that the bead receiver is at the top of the pool wall.

The side with the beads should be facing up. 3. Begin attaching the liner to the bead receiver by pushing the beads into place with a putty knife or similar tool. Work your way around the entire perimeter of the pool until all of the beads are in place.

4. Once all of the beads are attached, use a garden hose to fill up your pool with water.

  • Unroll the liner in the area where it will be installed
  • Spread out the liner so that it is flat and smooth
  • Trim the liner to the desired size, using a sharp knife or scissors
  • Install the liner following the manufacturer’s instructions
  • Typically, this involves attaching the liner to the top of the pool with hooks or similar devices
  • Fill the pool with water according to the manufacturer’s instructions, being careful not to overfill it

Beaded Liner for above Ground Pool

Adding a beaded liner to your above ground pool is a great way to add beauty and style. Beaded liners are available in many different colors and patterns, so you can find one that fits your specific taste. They are also easy to install, so you won’t have to spend hours trying to figure out how to put it in.

Beaded liners typically come with a vinyl strip that goes around the entire perimeter of the pool. This helps to create a seal between the liner and the wall of the pool. It also makes it easier to remove the liner when it’s time for cleaning or repairs.

Installing a beaded liner is usually a two-person job. One person will hold the liner in place while the other person attaches the vinyl strip. Once the strip is in place, you can inflate the liner and fill up your pool with water.

Beaded liners are an affordable way to add style and personality to your above ground pool. With so many different colors and patterns available, you’re sure to find one that you love. Installation is quick and easy, so you’ll be able to enjoy your new pool in no time!

How to Install Overlap Pool Liner

Installing an overlap pool liner is a fairly easy process that can be completed in a few hours. Here are the steps you’ll need to take: 1. Remove the old liner from your pool, if there is one already installed.

This can be done by draining the pool and then removing the tracks that hold the liner in place. Be sure to clean the surface of the pool before proceeding. 2. Cut out a template of your new liner using cardboard or paper.

This will help you determine how much liner you need to purchase. 3. Order your new liner based on the template you created. Make sure to get a liner that is slightly larger than your template so you have some room for error when installing it.

4. Install the new liner following the manufacturer’s instructions. Most liners will come with installation instructions, so be sure to follow those closely.

Can I Use Overlap Liner on a Beaded Pool

If you have a beaded pool, you may be wondering if you can use an overlap liner on it. The answer is yes! You can absolutely use an overlap liner on a beaded pool.

In fact, many people prefer to use an overlap liner on a beaded pool because it provides a more secure fit and helps to keep the beads in place. Here are a few things to keep in mind when using an overlap liner on a beaded pool: 1. Make sure that the bead receiver is properly installed before installing the liner.

If the bead receiver is not installed correctly, it could cause the beads to come loose and fall out of the pool. 2. When measuring for your liner, make sure to measure from the top of the bead receiver to the bottom of the pool wall. This will ensure that your liner fits properly and doesn’t leave any gaps where beads could escape.

3. Be sure to follow all instructions carefully when installing your liner. Overlap liners are typically easy to install, but it’s still important to take your time and do it right so that everything fits snugly in place. Overall, using an overlap liner on a beaded pool is definitely doable and can actually provide some benefits over other types of liners.

Just make sure that you take proper measurements and follow installation instructions carefully so that everything goes smoothly!

Pool Liner Bead Lock

If you own a pool, you know that keeping the water in can be a challenge. You’ve probably also heard of bead lock systems as a way to keep your liner in place. But what is a bead lock system?

And how does it work? A bead lock system is basically a ring that goes around the edge of your pool liner. The ring has a series of holes in it, and when you put the liner over the ring, the beads on the liner fit into those holes.

This keeps the liner in place and prevents it from slipping or moving around. There are several benefits to using a bead lock system. First, it makes installation easier because you don’t have to worry about lining up the beads on the liner with the holes on the ring.

Second, it provides a more secure hold for your liner, which can help prevent leaks. And third, it can give your pool a neater appearance by hiding any exposed beads. If you’re thinking about installing a new pool liner, or if you’re having trouble with your current one staying in place, consider using a bead lock system.

It could just be the solution you need!

Beaded Liner Vs Overlap

There are two main types of pool liners on the market today, beaded and overlap. Both have their pros and cons, but which one is right for your pool? Here’s a look at the difference between beaded and overlap pool liners:

Beaded Liner: A beaded liner is held in place by plastic beads that fit into a track around the perimeter of your pool. Beaded liners are easier to install than overlap liners, but they can be more expensive. Beaded liners also tend to last longer than overlap liners.

Overlap Liner: An overlap liner is held in place by plastic strips that are attached to the top rails of your pool. Overlap liners are less expensive than beaded liners, but they can be more difficult to install. Overlap liners also tend to not last as long as beaded liners.

How to Install a Beaded Pool Liner


How Do You Install Beaded Pool Liner?

It’s time to give your pool a facelift by installing a new beaded liner. This type of liner is easy to install and will give your pool a brand new look in no time. Here’s how to do it:

1. Remove the old liner from your pool. This can be done by carefully pulling it up from the sides and bottom of the pool. If you have any adhesive residue left behind, use a putty knife or scraper to remove it.

2. Clean the surface of the pool with a mild cleaner and hose off any loose dirt or debris. Allow the surface to completely dry before proceeding. 3. Unroll the new liner in the sun for at least 30 minutes so that it becomes more pliable.

This will make it easier to work with when you’re ready to install it. 4 . Position the liner in thepool so that one end is hanging overthe edge by about 2 feet .

Centerthe liner side-to-side and front-to-back before letting go . If necessary,use weights or people t o holdthe liner in place while you adjustit . Once you’re happy with itspositioning , let go oftheliner and allowit settleinto place onits own .

5  Trim awayany excesslinermaterial usinga sharpknife orutility blade , takingcare nottoslipand cutyourselfin th eprocess 6  Installthebead receivertrack aroundthe perimeterof th epool according toyour manufacturer’sinstructions 7 Attachth ebeadsto th ebead receivertrack 8 Inflateametalor plasticringthat comeswith thenewliner 9 Carefullylowertheringinto placewithinthepool 10 Fillyourpoolwithwateraccording toyour manufacturer ‘srecommendations 11 Enjoyyou rnewly installedbeadedliner !

Do I Need Coping Strips With a Unibead Liner?

No, you don’t need coping strips with a UniBead liner. The UniBead liner is designed to fit both above-ground and inground pools, so it has a built-in bead receiver that can accommodate either type of pool wall.

How Do You Install a Uni Bead Liner?

A uni bead liner is a type of vinyl pool liner that has a bead receiver channel running along its top edge. This channel allows the liner to be installed without the use of a separate bead receiver track. Installing a uni bead liner is a relatively simple process that can be completed in a few hours with just a few basic tools.

First, you will need to remove the old pool liner from the pool. This can be done by draining the pool and then using a putty knife or similar tool to pry the liner away from the walls and floor of the pool. Once the old liner is removed, you will need to clean and inspect the surface of the pool before proceeding with installation of the new uni bead liner.

Next, you will need to install any necessary hardware for your new uni bead liner. This may include installing new grommets or other fasteners around the perimeter of the pool. Once all hardware is in place, you will be ready to begin installation of your new uni bead liner.

To install your uni beadliner, start by positioning it at one end of your pool so that half of its width hangs over one side of the pool wall. Then, gently lower it into place making sure that there are no wrinkles or creases in the material. Once it is properly positioned, use your hands or a soft brush to smooth out any wrinkles or creases in order to ensure proper adhesion when bonding this seam later on.

After ensuring there are no wrinkles or creases, use something heavy like sandbags or bricks placed alongthe entire lengthof this side (the half hanging over) to secure itinto place until dry.; Doingthiswill help preventany movementor shifting duringthe bondingprocess which could cause problems later on.; Ifyou have more thanone personavailableto helpwith thisproject,, havesomeoneholdtheother endwhileyou positionand secureit into place.

; Now you’re ready for adhesive! Most people preferto usetheseam sealer/adhesivetapesforvinylpoolsas they providea strong bondand createa neaterlooking finishthan liquid adhesivescan.

How Much Will a Beaded Pool Liner Stretch?

Beaded pool liners are made to stretch and conform to the shape of your pool. The amount that a beaded liner will stretch depends on the size and depth of your pool, as well as the type of beads used. Most beaded liners will stretch between 1/4″ and 1/2″, but some may stretch up to 3/4″.

Beaded Above Ground Pool Liner Installation (With Voiceover) | Available at Pool Supplies


Installing a beaded pool liner is not as difficult as it may seem. With a little patience and careful planning, anyone can do it! Just be sure to measure twice and cut once, and you’ll be enjoying your new pool liner in no time.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *