1. Cut a piece of wire about 6 inches long. 2. String on about 30 beads. It doesn’t matter what kind you use.

3. Make a loop at one end of the wire, and twist it around itself to secure the beads. 4. Continue stringing beads onto the wire until you have a nice, full flower. 5. Make another loop at the other end of the wire, and twist it around to secure the beads in place.

6. Trim any excess wire, and your bead flower is finished!

  • Choose the color of beads you would like to use for your flower
  • gather all the materials needed such as wire, pliers, and beads 2
  • Cut a piece of wire about 6-8 inches long, using wire cutters
  • Thread beads onto the wire in any pattern or design you like
  • It is helpful to put larger beads in the center and smaller ones around them
  • Once you have reached the end of the wire, thread the last bead back through the first one to create a loop
  • Gently twist the two wires together until they are secure
  • You may need to use pliers to help with this step
  • Trim off any excess wire with wire cutters 5
  • To make leaves for your flower, thread 3-4 green seed beads onto a small piece of wire (about 3 inches long)
  • Make a small loop at one end of thewire, and then thread the other end back through the first bead again 6
  • Attach leaves to your flower by gently twisting them onto one ofthe wires onthe underside ofthe flower

Seed Bead Flower Tutorial

This is a seed bead flower tutorial that will teach you how to make a beautiful flower using only seed beads. You will need: -Seed beads in two colors (I used yellow and green) -A beading needle -Beading thread -Scissors Start by stringing about 30 of the yellow seed beads onto the beading thread. Leave a long tail at the end so that you can tie it off later.

Then, string on one green bead. Go back through the yellow beads, picking up two at a time and passing through the green bead again. Keep going until all of the yellow beads are used up.

Now, take your second color of seed beads (I used green) and string them onto the thread, leaving a long tail again. Make a loop with the thread around one of the petals made with the first color of seed beads, and then string on one bead before passing back through the loop to secure it. Continue making loops around each petal until all six petals have been attached.

Finally, take both tails of thread and tie them together tightly to close up the center of the flower. Trim any excess thread and your flower is complete!

How to Make Flower Bead Bracelet

Making beaded flower bracelets is a great way to show your personality and style. You can make them as simple or as detailed as you like, and they make great gifts for friends and family. Here’s how to make your own beaded flower bracelet:

1. Gather your materials. You’ll need beads in the colors of your choice, wire, wire cutters, and pliers. 2. Make the center of your flower by stringing three beads onto a piece of wire.

Leave about an inch of wire at the end so you can wrap it around the other side later. 3. Create the petals of your flower by adding five more beads to each side of the center bead trio. Make sure that all the beads are facing the same direction.

4. To finish off the petals, take each end of wire and thread it back through the first two beads on either side (the ones closest to the center). Wrap the wire around itself a few times and then trim off any excess with wire cutters. 5 .

Now it’s time to add leaves! String two green beads onto a piece of wire, then thread one end back through both beads so that they’re snug against each other. Trim off any excess wire and repeat until you have as many leaves as you want on your bracelet .

Now that you know how to make a basic beaded flower bracelet , try experimenting with different color combinations and bead sizes . Have fun !

How to Make a Flower Bracelet With Real Flowers

Making a flower bracelet with real flowers is a fun and easy project that can be done in just a few minutes. You’ll need a small bouquet of fresh flowers, some thin wire, and a pair of pliers. First, cut the stems of the flowers so they’re about two inches long.

Next, thread the wire through the center of each flower, leaving about an inch of wire on each side. Once all of the flowers are threaded onto the wire, twist the ends together to secure them. Finally, use the pliers to make a small loop at each end of the bracelet so you can easily slip it on and off your wrist.

How to Make a Seed Bead Bracelet With Clasp

Making a bracelet with clasp might seem like a daunting task, but we promise it’s not as difficult as it looks! Follow our step-by-step guide and you’ll have a beautiful piece of jewelry to show off in no time. What You’ll Need:

– Seed beads (We used size 11/0 seed beads) – Beading needle – Beading thread

– Clasp Instructions: 1. Cut a length of beading thread approximately 2 feet long.

Thread your needle and tie a knot at the end of the thread. 2. String your seed beads onto the thread. We used 25 beads for our bracelet, but you can use more or less depending on how long you want your bracelet to be.

Just make sure that you leave enough room at the end of the thread to attach your clasp!

How to Make a Bead Flower

Credit: www.youtube.com

How Do You Make Easy Beaded Flowers?

Beaded flowers are a beautiful and easy way to add a touch of elegance to any outfit or piece of jewelry. Making them is actually quite simple and only requires a few supplies. To start, you will need some beads, wire, pliers, and scissors.

You can find all of these items at your local craft store. The type of beads you use is up to you, but we recommend using small seed beads in a variety of colors. Once you have your supplies gathered, follow these steps:

1. Cut a length of wire that is about 18 inches long. Use your pliers to make a small loop at one end of the wire. This will be where you attach your first bead.

2. String on approximately 30 beads onto the wire. Make sure to leave enough space at the end so that you can make another loop. 3. Once all of your beads are strung on, use your pliers to make another loop at the end of the wire.

Trim any excess wire so that it is flush with the loop. 4. Your beaded flower is now complete!

How Do You Make a Flower With Big Beads?

If you want to make a flower with big beads, you will need to follow these steps: 1. Gather your materials. You will need some large beads, wire, and pliers.

You may also want to get a bead board or mat to help keep your work area organized. 2. Decide on the size and shape of your flower. This will determine how many beads you will need and what size wire to use.

3. Cut a piece of wire that is about twice as long as the circumference of your chosen bead(s). 4. String the beads onto the wire in the pattern or design that you desire. Once all the beads are on, twist the two ends of wire together to secure them in place.

5Slightly bend the wired structure so that it resembles a flower shape. 6Use pliers to curl any sharp edges on the petals inward so that they are not pointy or scratchy. 7Your pretty big bead flower is now complete!

How Do You Thread a Flower With Beads?

Assuming you would like a blog post on how to thread a flower with beads: Threading flowers with beads is a fun and easy way to add some extra flair to your floral arrangements. Here’s a quick step-by-step guide on how to do it:

1. Start by gathering your supplies. You’ll need some small beads, wire cutters, and needle nose pliers. 2. Cut a length of wire that will be long enough to wrap around the base of the flower and extend out past the petals.

3. String the beads onto the wire, using as many or as few as you like. The key here is to make sure that the holes in the beads are large enough so that they can slide easily over the wire. Otherwise, you’ll have a frustrating time trying to get everything lined up!

4. Once all of your beads are strung onto the wire, carefully wrap it around the base of the flower, making sure that all of the petals are covered. 5. Use your needle nose pliers to twist the two ends of wire together, securing everything in place. And that’s it!

Now you’ve got a beautiful beaded flower that’s ready to spruce up any arrangement.

How Do You Make Beaded Daisy Flowers?

The daisy is a popular choice for beading because it is a relatively easy flower to make. There are a few different ways to make beaded daisies, but the most common method involves stringing beads onto wire or thread to form the petals, then attaching them to a central bead or button. To start, you will need:

-Beads (in your choice of colors) -Wire or thread -Scissors

-Needle nose pliers (optional) 1. Begin by stringing your beads onto the wire or thread, making sure to leave enough length at the end to attach the petals to the center of the flower. To make each petal, string 5 beads onto the wire, then skip 1 bead and string another 5 beads (so you should have 2 groups of 5 beads separated by 1 bead).

Repeat this process until you have made all of your petals. You can make as many or as few petals as you like – just keep in mind that more petals will result in a fuller looking flower. 2. Once all of your petals are strung, it’s time to start attaching them to the center of the flower.

To do this, take onepetal and bend it in half so that the two ends meet in the middle (you may need to use needle nose pliers to help with this step). Then, poke both ends through one side of the central bead/button so that they come out on opposite sides. String one more bead onto each end of wire/thread, then pull tight so that everything is secure.

Repeat this process for each remaining petal until they are all attached. 3. Your beaded daisy is now complete!

How to make a DAISY CHAIN flower bracelet | Easy beaded 90s jewelry DIY


In conclusion, making a bead flower is a fun and easy project that can be enjoyed by people of all ages. With just a few supplies and some simple instructions, you can create your own beautiful bead flower to display in your home or give as a gift.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *