Step by Step How to Bead a Cross
Step by Step How to Bead a Cross

1. String your needle with beading thread, leaving a long tail. Tie a knot at the end of the thread. 2. String on 11 beads, skipping the first bead.

This will leave a “tail” of 10 beads. 3. String on 1 bead and pass through the next bead (skipping 2 beads). Repeat this step until you have 4 beads on each side of the center bead.

You should now have 5 beads in the center and 4 beads on each side. 4. To add the arms of the cross, string on 2 beads and pass through the next bead (skipping 3 beads). Repeat this step until you have 4 beads on each arm of the cross.

You should now have 9 beads in the center and 8 beads on each arm. 5. To finish, string 1 more bead and pass through the first bead of Step 2 (the one you skipped).

One of the most popular beadwork projects is beading a cross. Whether you are making a simple cross for yourself or an ornate one as a gift, the process is relatively the same. Follow these steps and you will have a beautiful cross in no time!

1. Choose your beads. You will need two colors of beads, one for the body of the cross and one for the arms of the cross. Pick out beads that have meaning to you or that compliment each other well.

2. String your beads onto thread or beading wire. Make sure to leave enough room at the end of each strand so that you can attach it to another strand later on. 3. Begin by stringing 4 beads of your main color onto one strand.

Then, take your second color and string 2 beads onto another strand. Cross the two strands so that they form an “X” shape and then bring them back together so that all four beads are touching in the center (as shown in photo). 4. String 2 more beads of your main color onto one strand and 1 bead of your second color onto another strand…and repeat step 3 until your piece is as long or short as you’d like it to be!

Step by Step How to Bead a Cross


How Do You Make a Simple Bead Cross?

Making a simple bead cross is a great way to show your faith and can be done with just a few supplies. You will need: -Beads (I used 6mm fire polished beads in red, white, and blue)

-Beading thread or fishing line -Scissors -A needle (I used a #12 beading needle)

First, cut a length of thread or fishing line about 24 inches long. Thread your needle and tie a knot at the end of the thread. String on 3 beads (I used 1 red, 1 white, and 1 blue bead), leaving about an inch of space at the end of the thread.

Cross the two ends of the thread over the center bead so that they form an “X” shape. String on another 3 beads (again, I used 1 red, 1 white, and 1 blue bead). Cross the two ends of the thread over this center bead as well so that they form another “X” shape.

Continue adding beads in this manner until you have reached your desired length for your cross. Once you have added all of your beads, tie off the end of your thread with a knot and trim any excess threads. Your simple bead cross is now complete!

What are the Steps in Bead Making?

There are many steps in bead making, but here is a basic rundown of the process: 1. First, the clay is rolled into a long rope. 2. Then, the rope is cut into small pieces, called beads.

3. Next, the beads are placed on a wire or string and left to dry. 4. Once they are dry, they can be painted or glazed. 5. Finally, the beads are fired in a kiln to harden them.

How Do You Make a Cross Wire?

In order to make a cross wire, you will need two pieces of wire that are the same length. You will also need a pair of pliers and a wire cutter. First, take one piece of wire and make a loop at one end.

Then, take the other piece of wire and make a loop at one end as well. Next, use the pliers to twist the two loops together until they are tight. Finally, use the wire cutter to trim any excess wire from the ends.

How Do You Make a Bead Necklace Step by Step?

If you’re looking to make a bead necklace, there are just a few simple steps to follow. First, decide on the length of your necklace. Then, choose your beads.

You can either string them all on one thread or wire, or create individual sections by stringing them on separate pieces of thread or wire and then connecting those sections with jump rings. Once you have all your beads strung, add a clasp to one end and a jump ring to the other so that the necklace can be worn. And that’s it!

With just a few simple steps, you can make a beautiful bead necklace that’s perfect for any occasion.


How to Make a 3D Beaded Cross

It is not uncommon to see people wearing crosses as a symbol of their faith. What you may not know is that there are different types of crosses, and each has its own meaning. The 3D beaded cross is a type of cross that is often seen worn by those who have a strong faith.

This type of cross is also known as the crucifix, and it is said to represent the suffering of Jesus Christ on the cross. The 3D beaded cross can be made from many different materials, but the most common material used is wood. Other materials that are sometimes used include metal, glass, or even plastic.

The beads that are used to make the cross can also be made from different materials, but they are usually made from wood or metal. The size of the beads will also vary depending on the size of the cross that you want to make. Making a 3D beaded cross is not difficult, but it does take some time and patience.

First, you will need to gather all of your supplies. You will need a piece of wood (the size will depend on how large you want your cross to be), some small nails, wire cutters, and pliers. You will also need a drill with a small bit (about 1/8 inch).

Once you have all of your supplies gathered, you can begin making your cross. Start by drilling four small holes into your piece of wood. These holes should be spaced evenly apart so that they form a square shape when viewed from the top down.

Next, take two nails and insert them into two opposite corners of the square shaped hole that you just created. Be sure that the nails are inserted snugly so that they do not fall out easily. Now take your wire cutters and cut four pieces of wire (each about 12 inches long).

Take one piece of wire and thread it through each nail head so that all four wires meet in the middle at the top point of your square shaped hole (this forms the arms of your crucifix). Now twist each wire around itself several times until it is secure (do not cut off any excess wire yet). Next, take two more nails and insert them into two remaining corners diagonally across from where you placed your first set of nails (these will act as feet for your crucifix).


This blog post gives clear instructions on how to bead a cross. It is easy to follow and understand. With these clear instructions, anyone can make a beautiful cross.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *