You don’t need a pegboard to use Perler beads! All you need is some sort of flat surface to fuse the beads onto. You can use a sheet of parchment paper or even an old cookie sheet.
If you’re using a cookie sheet, make sure it’s one that you don’t mind ruining because the beads will be very difficult to remove once they’re fused on.
- Place a piece of parchment paper or ironing paper on top of your work surface
- Arrange your Perler beads in the desired pattern on the parchment paper
- Place another piece of parchment paper or ironing paper on top of the Perler beads
- Use a household iron to press down on the top piece of parchment paper for 30 seconds-1 minute, moving the iron around so that all areas are heated evenly
- Be careful not to touch the iron directly to the Perler beads, as this can cause them to melt and fuse together permanently
- Allow the fused Perler bead design to cool completely before handling further
Credit: leftbraincraftbrain.com
Do You Need a Peg Board for Perler Beads?
No, you don’t need a peg board for Perler beads. You can use any type of board, as long as it has evenly spaced holes that the beads can fit into. Peg boards are just one option for beading boards; other popular choices include foam boards and bead trays.
If you’re using a peg board, you’ll also need pegs to hold the beads in place while you iron them.
What Can I Use for Perler Beads?
Perler beads are a type of plastic bead that can be fused together with heat. They are often used to make colorful designs and patterns. Perler beads can be found at many craft stores or online.
How Do You Attach Perler Beads Without an Iron?
Perler beads are a great way to add some color and fun to any project, but if you don’t have an iron handy, how can you attach them? Here are a few methods that will work in a pinch:
1. Use clear tape.
This is the quickest and easiest method, but it does require that you have access to clear tape. Simply place the beads in your desired pattern on a piece of wax paper or parchment paper, then cover with another piece of wax paper or parchment paper. Gently press down on the top layer of wax paper or parchment paper to secure the beads in place, then use clear tape to adhere the two layers together.
Trim away any excess wax paper or parchment paper, and your design is ready to go!
2. Use hot glue. Hot glue works just as well as tape, but it can be a bit messier.
Again, start by placing your beads on a piece of wax paper or parchment paper in your desired pattern. Cover with another piece of wax paper or parchment paper and press down gently to secure the beads in place. Then run a line of hot glue along the edge of one side of the design (you can also do this around the entire perimeter if you want).
Carefully peel away the top layer of wax paper or parchment paper and lay it down on top of the glued side, pressing gently to adhere. Trim away any excess wax paper or parchmentpaper and your design is complete!
3. Use a clothespin clip.
This method is similar to using hot glue, but it’s much cleaner and easier (in my opinion). Start by placing your beads on a piece of wax paper or parchment paperthen covering with another pieceofwaxpaperorparchementpaperandsmoothly pressingdowntosecurethebeadsintoplacebetweenthetwo sheets . Next , takea clothespinandclipitovertheedgeofthebeaddesign so thattheclothespinissecurelyholdingdownthetopsheetofwaxpaperorparchementpaper .
Finally , flip theremainingsheetofwaxpaperorparchementpaperalsovertop sothatitisnowcoveringthebackofthedesignandthesidesarecompletelyenclosedbytheclothespin . Yourdesignis nowreadytoiron !
How Do You Melt Perler Beads in the Microwave?
Perler beads are a type of plastic fuse bead that can be arranged on pegboards to create colorful designs and patterns. The beads can be melted together using a household iron or microwave, which allows you to fuse the beads together permanently. When melting Perler beads in the microwave, it is important to use a low heat setting and to place the beads on a sheet of parchment paper to prevent them from sticking to the bottom of the microwave safe dish.
To melt Perler beads in the microwave, start by arranging your beads on a sheet of parchment paper. Then, place the parchment paper with the beads onto a microwavable safe dish. Set your microwave to 50% power and heat the dish for 30 seconds at a time until the beads are melted together.
Once melted, allow the design to cool completely before handling.
How to make a perler bead SUPERHERO!! Without a pegboard
How to Use Perler Beads Without an Iron
If you’ve ever wanted to make a Perler bead project without using an iron, there are a few different methods you can try. The first is to use a hair straightener. Place your Perler beads on the desired design, then put a piece of parchment paper over them.
Run the hair straightener over the top of the parchment paper until the beads are melted together. Another method is to use a hot glue gun. Again, place your Perler beads on the desired design and put a piece of parchment paper over them.
Squeeze some hot glue onto the parchment paper and hold it in place until the glue dries and hardens. You can also use an oven to melt your Perler beads together. Preheat your oven to 200 degrees Fahrenheit and place your Perler bead project on a baking sheet lined with parchment paper.
Bake for 3-5 minutes, or until the beads are melted together. No matter which method you choose, be sure to let your project cool completely before handling it so you don’t burn yourself!
Conclusion
Perler beads are a great way to craft without having to use a pegboard. You can use them to make keychains, magnets, and other small trinkets. They’re also great for teaching kids how to count and sort colors.
