To put beads on with a bobby pin, first thread the bead onto the pin. Then, holding the bead in place, bend the end of the pin around it to secure it. Finally, use your fingers to twist the two ends of the pin together so that the bead is snug against your head.

  • Hold a bobby pin in one hand and pick up a bead with the other hand
  • Place the bead on the bobby pin, holding it in place with your fingers
  • Repeat steps 1 and 2 until you have the desired number of beads on the bobby pin
  • To secure the beads in place, bend the ends of the bobby pin inward so that they touch each other
How to Put Beads on With a Bobby Pin


How Do You Put Beads on Without a Beader?

Beading without a beader is a bit more challenging, but it can be done! Here are a few tips: 1. Use a long needle.

This will help you thread the beads more easily. 2. Start with the biggest beads first. This way, you can work your way down to the smaller beads.

3. Use pliers to hold the beads in place while you’re working with them. This will help keep everything neat and tidy. 4. Take your time!

Beading can be frustrating, but it’s important to relax and go slow so that you don’t make any mistakes.

How Do You Put Beads in Hair With a Needle And Thread?

If you’re looking to add a little extra something-something to your hairstyle, beads are always a fun option. But if you’re not sure how to go about it, don’t worry – we’ve got you covered. Here’s everything you need to know about putting beads in hair with a needle and thread.

The first step is to gather your supplies. You’ll need beads (of course), hair elastics, scissors, a needle and thread. Once you have everything assembled, it’s time to start prepping your hair.

If your hair is on the shorter side, you may want to consider giving yourself a little bit of extra length by adding in some extensions. This will give you more room to work with when it comes time to string the beads onto the thread. Next, take one of your elastics and cut it into small pieces – these will be used to tie off the sections of hair that you’ll be working with.

To make things easier on yourself, divide your hair into small sections before starting to bead them. That way, you won’t have too much hair hanging loose while you’re working and risk getting tangled up. Once your sections are ready, it’s time to start stringing those beads!

Start byThreading your needle and then tying a knot at the end of the thread – this will prevent the beads from falling off as you’re working. Then, simply slide each bead down the thread until they’re all in place. When you’re happy with the arrangement, tie off each section with one of those small elastic pieces we mentioned earlier.

And that’s all there is to it!

How Do You Put Beads on the End of Braids?

There are a few different ways that you can put beads on the end of braids, and the method you choose will depend on the look you’re going for and the type of bead you’re using. If you’re using large beads, you can simply thread them onto the end of each braid before securing with an elastic. For smaller beads, you may need to use a needle and thread to attach them.

One popular way to add beads to braids is called “knotting.” To do this, thread a bead onto the end of a braid, then make a small loop with the hair and tie it in place with another piece of hair. You can also use this method to add multiple beads to one braid.

Another option is to “braid” the beads into the ends of your braids. To do this, take three beads and hold them together at one end with your fingers. Then, take a small section of hair from one braid and wrap it around all three beads (like you would when braiding), before passing it over to the next braid and repeating until all three braids have been used.

This creates a pretty beaded effect at the ends of your braids!

How Do You Attach Something to a Bobby Pin?

Bobby pins are a great way to keep your hair out of your face and can be used to create many different hairstyles. But sometimes you may need to attach something to your bobby pin, like a flower or feather. Here’s how to do it:

First, take the object that you want to attach to the bobby pin and make a small hole in it. Then, thread a piece of thin wire through the hole and bend the ends of the wire so that they’re pointing downwards. Next, take the bobby pin and insert the wire through one of the holes in the side of the pin.

Make sure that the bent end of the wire is pointing downwards so that it doesn’t come out easily. Finally, twist the wire around itself a few times at the base of the bobby pin to secure it in place. And that’s it!

Your object is now attached securely to your bobby pin.

How to Add Beads to Braids using a Bobby Pin | Entertaining Hair Tutorials and Children Lullabies

How to Put Beads in Hair Without Beader

If you’re looking to add a little something extra to your hairstyle, beads are a great option. But if you don’t have a beader, don’t worry – there are plenty of other ways to get the job done. Here are four bead-putting methods that don’t require a beader:

1. Use thread. Cut a length of thread that is twice as long as the section of hair you want to bead.Thread the beads onto the thread, then tie the two ends of the thread together so that the beads are securely in place. Gently pull the threaded beads through your hair until they reach the desired spot, then tie off the thread to secure them in place.

2. Use dental floss. This method works similarly to using thread, except you’ll use dental floss instead. Cut a length of dental floss and string on your desired beads.

Tie off both ends of the floss so that the beads are secure, then gently pull them through your hair until they reach the desired spot. Once they’re in place, cut off any excess floss and discard it. 3.”Weaving” method.

This method works best with small beads or those with large holes. Begin by making a small hole in one side of each bead (a needle or safety pin can work for this). Next, take three strands of hair and weave them together at their base like you would when braiding hair – but instead of adding more strands as you go, add in beads every few wraps around all three strands.


This is a great way to put beads on with a bobby pin. It’s easy and it looks great. Plus, it’s a lot cheaper than buying a new pair of earrings.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *