1. String your chosen beads onto beading wire, leaving about a 6-inch tail. 2. Make a loop at the end of the wire, and then thread the tail through the loop to secure it. This is called a wrapped loop.

3. Continue stringing beads until your bracelet is the desired length. 4. To finish, make another wrapped loop at the other end of the bracelet. 5. Trim any excess wire, and then use needle-nose pliers to gently squeeze both loops closed.

  • Decide on the size of your bracelet
  • Cut a piece of stretchy beading cord to that length, plus about an inch extra
  • String on your seed beads in whatever pattern you like
  • Once you’ve reached the desired length, tie a knot at each end of the bracelet to secure the beads in place
  • 5) Trim any excess cord, and voila! You’ve got yourself a beautiful new bracelet!
How to Make Stretchy Seed Bead Bracelets

Credit: sarahmaker.com

What Do You Need to Make Stretchy Bead Bracelets?

To make a stretchy bead bracelet, you will need: -Beads (preferably of uniform size) -Stretchy beading cord or string

-Scissors -A ruler or measuring tape First, measure out the length of cord you will need to cut by wrapping it around your wrist several times and then adding an extra inch or two.

Cut the cord with scissors and set it aside. Next, thread your beads onto the cord, using as many or as few as you like. Once all the beads are on, tie a knot at each end of the bracelet to secure them in place.

Finally, give your bracelet a good stretch to make sure the knots are tight and trim any excess cord. Your new bracelet is now ready to wear!

How Do You Thread Seed Beads on Elastic?

Threading seed beads on elastic is a great way to create beautiful bracelets, necklaces and other jewelry. There are a few different ways to do this, but the most common method is using a needle and thread. To start, you will need a needle that can fit through the holes of the beads (a beading needle is ideal), and strong thread such as nylon beading thread or fishing line.

You will also need scissors and a ruler or tape measure. 1) Cut a length of elastic that is comfortable for you to wear, plus an extra inch or two. Use the ruler or tape measure to make sure it is cut evenly.

2) String your first bead onto the needle, then tie a knot in the thread about 1/2 inch from the bead. This will keep the bead from sliding off when you are wearing it. 3) Continue stringing beads onto the elastic until you have reached your desired length.

Make sure to leave enough room at each end so that you can tie knots to secure the bracelet (about 1-2 inches). 4) To finish, tie knots at each end of the bracelet, trim any excess thread, and enjoy your new piece of jewelry!

What Size Stretch Cord for Seed Beads?

Assuming you are talking about using a stretch cord for stringing beads: The size of the stretch cord you use will depend on the size of the beads you are using. For example, if you are using small seed beads (2mm or less), you will want to use a very thin cord, such as 0.5mm or 0.7mm.

If you are using larger beads (4mm or larger), you can use a thicker cord, such as 1mm or 1.5mm. It is important to choose a cord that is strong enough to support the weight of the beads, so avoid using something too thin or flimsy. Also be sure to knot the ends of the cord securely before adding any beads.

How Do You Finish a Seed Bead Stretch Bracelet?

Assuming you would like tips on how to finish a beaded bracelet: There are many ways to finish off a beaded bracelet, but one of the most common is with a crimp bead. To do this, first thread your beads onto the stretch cord, leaving about an inch at the end.

Then, slide on a crimp bead and use needle nose pliers to flatten it. Next, take the end of the cord and thread it back through the crimp bead. Pull it tight and flatten the second side of the crimp bead.

Finally, trim off any excess cord and add a clasp if desired.

How to Make a Simple Stretchy Seed Bead Bracelet | jewelry tutorial

How to Make a Beaded Bracelet With Clasp

Making your own beaded bracelet with clasp is a great way to add some personal flair to your jewelry collection. Plus, it’s a fun and easy project that you can complete in an afternoon. Here’s what you’ll need to get started:

-Beads (choose whatever colors and sizes you like!) -Jewelry wire -Wire cutters

-A small jump ring -A lobster claw clasp 1. Begin by threading your beads onto the jewelry wire.

Leave about 6 inches of wire at the end so you have enough to work with when attaching the clasp later on. 2. Once all of your beads are on, take one of the wire ends and make a loop. This will be used to attach the jump ring later on.

3. Cut the other end of the wire, leaving about 1 inch of excess. Make another loop with this end as well, but make sure it’s facing in the opposite direction from the first loop (this will ensure that your bracelet lays flat once it’s finished). 4. Use your wire cutters to trim away any sharp edges from both loops.

5. Open up the jump ring and slide it through both loops on the wire ends before closing it back up again securely. 6. Finally, attach your chosen lobster claw clasp to one side of the jump ring using pliers (just open up each side of the clasp and hook them onto either side of the jump ring). And that’s it!


This blog post was very informative and easy to follow. It showed step-by-step instructions on how to make a beautiful stretchy seed bead bracelet. The pictures were also very helpful.

I enjoyed reading this post and I will definitely be trying out this craft myself!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *