Clay bead earrings are easy to make and only require a few materials. First, gather your clay and roll it into small balls. Next, use a toothpick or skewer to make a hole in the center of each ball.

Once all of your beads have holes, bake them in the oven according to the instructions on your clay package. Once they are cool, string them onto jewelry wire or thread and add any other accent beads. Finish by attaching clasps to the ends of your earrings.

  • Choose the clay beads you would like to use for your earrings
  • You can find these at most craft stores
  • String the beads onto a piece of wire or string, leaving enough room at the end to create a loop
  • Make sure that all of the beads are facing the same direction and that they are spaced evenly along the wire or string
  • Once you have strung all of the beads, gently bend the wire or string so that it forms a loop on each side
  • Use pliers to secure each loop by twisting it closed
  • Trim any excess wire or string from each earring
How to Make Clay Bead Earrings


Can You Make Earrings With Clay Beads?

Yes, you can make earrings with clay beads. You will need to bake the beads in the oven to harden them first. Then you can thread them onto earring wires or hooks.

How Do You Make Clay Earrings at Home?

Clay earrings are a fun and easy way to add a personal touch to your jewelry collection. You can make them at home with just a few simple supplies. Here’s what you need to get started:

-Polymer clay in the color of your choice (I used Fimo soft clay) -A pair of small, sharp scissors -A toothpick or other sharp object for making holes in the clay

-Baking sheet -Oven First, condition your clay by working it with your hands until it’s soft and pliable.

Then roll it out into a long rope about 1/4 inch thick. Cut the rope into small pieces, then use the scissors to create whatever shape earrings you like. I made mine fairly simple – just small circles.

Make sure to poke a hole in the top of each one so you can thread them onto earring hooks later. Place your earrings on a baking sheet lined with parchment paper, then bake them in a preheated oven according to the package directions (mine said 15 minutes at 265 degrees Fahrenheit). Allow them to cool completely before handling.

Once they’re cooled, you can add any finishings you like – paint, glitter, etc. I chose to leave mine plain. Thread them onto some cute earring hooks and enjoy!

How Do You Put Beads on Clay Earrings?

There are a few different ways that you can put beads on clay earrings. You can either string the beads onto wire and then attach the wire to the earring, or you can glue the beads directly onto the earring. If you’re using wire, you’ll first need to thread the beads onto the wire.

Once all of the beads are on, twist the ends of the wire together to secure them in place. Then, use a small amount of glue to attach the wire to the back of the earring. Be sure not to use too much glue, as it may seep through and be visible on the front of the earring.

If you’re gluing beads directly onto an earring, start by applying a small amount of glue to one bead. Press this bead into place on the earring, and then repeat with additional beads until your design is complete. You may need to hold each bead in place for a minute or two until they’re fully secured.

What is Needed to Make Clay Earrings?

In order to make clay earrings, you will need the following materials: oven-bake clay, rolling pin, sharp knife or cutting tool, cookie cutter (optional), sandpaper (optional), paintbrush (optional), and jump rings. You will also need a few basic household tools, such as an oven, baking sheet, and wire cutters. First, condition your oven-bake clay by kneading it until it’s soft and pliable.

Then, use a rolling pin to roll the clay out into a thin sheet. Next, use a sharp knife or cutting tool to cut out shapes from the clay sheet. If you’re using a cookie cutter, gently press the cutter into the clay to create your shape.

Use sandpaper to smooth out any rough edges on your earring shapes. Once your earrings are cut out, bake them according to the instructions on your oven-bake clay package. Once they’re cool to the touch, brush on a layer of paint (if desired).

Finally, use jump rings to attach your earrings to hooks or posts.

How to make CLAY BEAD earrings| Taylor Atherton

Clay Bead Earring Kit

Clay bead earring kit is an easy and fun way to make your own earrings. The kit includes all the materials you need to make two pairs of earrings. It’s a great activity for kids or adults, and makes a great gift.

The clay bead earring kit includes: -2 pairs of hypoallergenic surgical steel earring hooks -4 oz of air-dry clay in 4 colors (red, blue, yellow, and white)

-1 clear acrylic sealer spray -1 set of instructions To make the earrings:

1.Start by rolling the clay into balls. You can make them any size you want, but remember that they will shrink a bit when they dry. Make sure the balls are all roughly the same size.

2.Next, use a toothpick or skewer to poke a hole through the center of each ball. This is where your earring hook will go later. 3String the balls onto the jewelry wire, threading them on one at a time until you have reached your desired length.

Make sure to leave enough wire at each end so that you can easily attach your hooks later on. 4 Allow your beads to dry completely overnight before spraying with a layer or two of clear acrylic sealer . This will help protect them from wear and tear .

5Finally , attach your hooks to each end of the wire , and enjoy wearing your new homemadeearrings !


Clay bead earrings are a fun and easy way to add a personal touch to your jewelry collection. They can be made in any color or style you can imagine, and they make great gifts for friends and family. With just a little time and effort, you can create beautiful clay bead earrings that will be cherished for years to come.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *