How to Make Beaded Pens

Beaded pens are a fun and easy way to add a personal touch to your writing. All you need is some basic supplies and a little creativity. Here’s how to make beaded pens:

1. Gather your materials. You’ll need pen blanks (you can find these online or at craft stores), beads, glue, and a toothpick or other sharp object. 2. Decide on the design for your pen.

Will the beads be strung randomly, or in a pattern? Sketch out your idea if needed. 3. Begin adding beads to the pen blank using glue.

Start with a small amount of glue, adding more as needed. Apply pressure to keep the beads in place as they dry. 4. Once all of the beads are in place, allow the glue to dry completely before using your new beaded pen!

• You will need: -beads (I used 6mm beads) -a pen that you don’t mind taking apart (I used a bic pen) -scissors -tape -a needle and thread 2
• Cut the end off of the pen that has the ink cartridge in it
• Keep the other end with the clicker intact
• Empty out all of the ink from the ink cartridge by puncturing a small hole in it and squeezing out the ink until it is empty
• Discard the empty ink cartridge
• Measure how long you want your beaded portion to be and cut a piece of tape to that length + 1 inch for overlap
• I made mine about 3 inches long
• Place your beads on the tape, making sure they are close together but not touching each other so they have room to move slightly when you wrap them around the pen later on without falling off or becoming too loose on the pen
• Once you have placed all of your beads on the tape, carefully wrap it around the end of your pen, overlapping the ends of tape by about an inch, and secure with another piece of tape wrapped around tightly several times
• 6 Trim away any excess tape if necessary so that only a small amount is sticking up above your top bead(this will make it easier to thread your needle through later)
• 7 Thread your needle and knot one end securely
• 8 Starting at either end of your beaded section, poke your needle through all ofthe beads until you come out atthe other side
• 9 Tie a knot inyour threadoncesecurely fastened ,10 Trim away any excessthread
• Your new beadedpen is now complete!

How to Make Beaded Pen Covers

What is the best way to make beaded pen covers? This is a question that I get asked a lot. And, there are a few different ways that you can do it.

But, I’m going to show you my favorite way. First, you’ll need some supplies. For this project, you’ll need: seed beads, bugle beads, beading thread, scissors, and a needle.

You’ll also need a pen – any type will do. I like to use pens with clear barrels so that I can see how the beads are lining up as I work. To get started, cut a length of beading thread about 18 inches long.

Thread your needle and tie a knot at one end. Then string on about 20 seed beads. These will be used as spacers between the bugle beads later on.

Once you have your seed beads strung on, thread on one bugle bead and then go back through all of the seed beads (this will help keep the bugle bead in place). Continue adding bugle beads and going back through all of the seed beads until your thread is almost full – leaving about 6 inches at the end. Now it’s time to start shaping your pen cover!

To do this, simply start bending the bugle beads around the barrel of your pen. It helps to hold onto both ends of the thread while you’re doing this so that everything stays in place. Keep bending and shaping until you’ve got a nice tight fit around your pen barrel – you don’t want any gaps!

Silicone Beads for Pens

If you’re looking for a fun and unique way to decorate pens, you should definitely check out silicone beads! They come in all sorts of colors and styles, so there’s sure to be something that catches your eye. Plus, they’re extremely easy to use – simply slide the bead onto the pen barrel and you’re good to go!

Not only do they look great, but silicone beads are also very practical. They help keep pens from rolling off surfaces and getting lost, which is always a plus. If you’re looking for a fun way to accessorize your writing supplies, silicone beads are definitely worth checking out!

Beads for Beaded Pens

Beaded pens are a beautiful and unique way to add personality to your writing. They also make great gifts! Beaded pens can be made with any type of beads, but seed beads are the most popular because they are small and easy to work with.

To make a beaded pen, you will need: -Pencils or pens -Seed beads in various colors

-Thread or fishing line -Scissors Start by threading your beads onto the thread or fishing line.

Make sure to leave enough room at the end so that you can tie it off later. Once all of your beads are on, start wrapping the thread around the barrel of the pen or pencil. Wrap tightly, but not so tight that you can’t still twist the barrel.

Continue wrapping until you reach the top of the pen or pencil, then tie off the end. Trim any excess thread and voila! You now have a beautiful beaded pen!

Bubblegum Bead Pens

Bubblegum Bead Pens are a fun and unique way to write! They come in a variety of colors and each pen has a different flavor. You can find them at most stores that sell pens and other office supplies.

Beaded Pen Charms

Beaded pen charms are a fun and easy way to add personality to your writing instruments! They also make great gifts for friends and family who love to write. Here are some tips on how to make your own beaded pen charms:

1. Gather your supplies. You will need some beads, wire, pliers, and a pen. Choose beads that are small enough to fit onto the wire, and that have large holes so the wire can easily go through them.

2. Cut a piece of wire that is about 6 inches long. Use the pliers to bend one end of the wire into a loop. This will be the top of your charm, where it will attach to the pen.

3. String the beads onto the wire, sliding them down until they sit against the loop you created in step 2. Make sure you leave enough space at the end of the wire so you can create another loop. 4. Once you have strung all of your beads onto the wire, use the pliers to bend the other end of the wire into a loop. This will be how you attach your charm to the pen!

5. Slip your charm onto your favorite writing instrument and enjoy!

Credit: happyhourprojects.com

What Size Beads Do You Use for Beadable Pens?

Beadable pens are a great way to add a little bit of personality to your writing. Whether you’re using them for school, work or just for fun, these pens are sure to make a statement. But what size beads should you use for your beadable pen?

The answer may surprise you – there is no “right” size bead to use for beadable pens. In fact, the only limit is your imagination! You can use any size bead that you like, as long as it fits snugly on the pen’s tip.

That said, smaller beads tend to be more popular because they offer more design options and they’re less likely to fall off the pen. If you’re looking for some inspiration, take a look at what others have done with their beadable pens. There are some amazing designs out there, and with a little creative thinking, you can come up with something truly unique.

So grab some beads and get started – your perfect pen awaits!

How Do You Put Beads on a Pen?

Assuming you would like a step by step guide on how to put beads on a pen: You will need the following supplies: -Beads of your choice (different colors and sizes work well together)

-Pen with removable cap (Sharpie brand pens work great) -Clear glue or hot glue gun with glue sticks -Scissors

-Optional: tweezers for smaller beads Instructions: 1. Begin by removing the cap from your pen.

Set it aside until later. 2. Next, decide on the pattern or design you would like your beads to be arranged in. You can string them all in one color, alternate between two colors, or create a more complex pattern with multiple colors.

Once you have decided, get started threading your beads onto the pen. If using clear glue, add a small amount to the end of the pen before adding each bead. This will help keep them in place better than no glue at all.

If using a hot glue gun, carefully apply a small dab of glue to the back side of each bead before placing it onto the pen barrel. Allow time for any applied glue to dry completely before moving on to the next step. 3a.

If you are happy with your bead design and everything is securely glued in place, replace the cap on your newly decorated pen and enjoy! If using clear glue, wait 24 hours for it to fully cure before using or gifting your project. 3b. If you are not satisfied with how your beads are arranged, simply remove them by gently pulling them off of the dried adhesive (clear glue) or by heating up the area with a hair dryer and peeling them off (hot glue).

How to Make Your Own Pen?

If you’re looking for a fun project that you can do at home, why not try making your own pen? It’s a great way to recycle materials and create something unique that you can use every day. Plus, it’s a perfect gift for the person who has everything!

Here’s what you’ll need to make your own pen: -A recycled pen barrel. You can find these at office supply stores or online.

Just make sure to wash it out thoroughly before starting your project. -Paper clips. These will be used to secure the ink reservoir inside the pen barrel.

-An empty ink cartridge. You can find these at art supply stores or online. Be sure to get the right size for your pen barrel.

-Super glue. This will be used to attach the paper clips and secure the ink cartridge in place. Now that you have all of your supplies, let’s get started!

1) Start by removing the cap from the recycled pen barrel. Set it aside for now – we’ll come back to it later. 2) Next, take your paper clips and bend them into small “U” shapes.

There should be two of them – one for each end of the ink cartridge. 3) Now, insert the ink cartridge into the pen barrel so that the bent paper clip ends are on either side of it, holding it in place securely. 4) Finally, apply some super glue around the edge of each end of the ink reservoir where it meets the paper clip “U.” Allow it to dry completely before using your new pen!

How Do I Make Beads?

Beads are a beautiful and popular decoration for all kinds of crafts, from jewelry to home décor. But how are they made? It’s actually quite simple!

The first step is to gather your materials. You will need some sort of clay or dough (air-dry or oven-bake), a rolling pin, a sharp knife, and something to make holes in the beads (a toothpick or skewer works well). If you want to paint or glaze your beads after they’re dry, you will need those supplies as well.

Next, roll out your clay or dough until it’s about ¼ inch thick. Then use the knife to cut it into small squares or rectangles. These will be the basic shapes of your beads.

Use the skewer or toothpick to poke a hole through the center of each one. Now it’s time to bake or air-dry your beads, depending on which type of clay you used. Follow the instructions on your clay package for baking temperature and time, if applicable.

Once they’re dry, you can string them together with thread, wire, fishing line – anything that will fit through the holes you made earlier. Or you can glue them onto another project like a picture frame or vase. Paint them with acrylics, glaze them with ceramic glaze – there are endless possibilities for decorating your beads!

BEADED PEN TUTORIAL | DIY BUBBLEGUM BEAD PENS

Conclusion

This is a great tutorial for anyone who wants to make beaded pens. The author provides clear instructions and photos to help guide you through the process. With a little time and effort, you can create beautiful beaded pens that will add a touch of elegance to your desk or office.