1. Start by condition the clay by working it in your hands until it’s soft and pliable.
2. Cut a long, thin strip of clay from the block using a sharp knife or blade. The strip should be about 1/4 inch wide and as long as you want your bracelet to be, plus an extra inch for overlapping at the clasp.
3. Place the strip on a flat surface and use your fingers to slightly flatten it out until it’s about 1/8 inch thick all around.
4. Pick up one end of the strip and begin rolling it into a coil, keeping the thickness as even as possible as you go. Once you’ve reached the end of the strip, lightly press the seam where the two ends meet to fuse them together.
5. Continue coiling the clay until you’ve reached your desired bead size; for this bracelet we used beads that were about 1/2 inch wide by 1/4 inch tall . To make smaller beads, simply coil less clay around itself; for larger beads add more clay to each coil . Use a toothpick or other sharp object to poke a hole through each bead while they’re still soft; this will make stringing them easier once they’re baked .
6. Preheat your oven to 275 degrees Fahrenheit and line a baking sheet with parchment paper or foil . Gently place each bead onto the prepared baking sheet , making sure they don’t touch one another since they may stick together while baking . Bake for 15 minutes , then remove from oven and let cool completely before handling further .
7. String cooled beads onto jewelry wire or stretchy cord , adding small spacers between each if desired ; we used silver-colored seed beads for ours .
- Start by rolling a long, thin coil of clay
- The thickness of the coil should be uniform throughout
- Once you have a long coil, begin gently pressing it flat with your fingers
- Work your way down the length of the coil, making sure to keep an even thickness
- Use a sharp knife or blade to cut the flattened coil into equal sections—these will be your beads! 4
- To give your beads some texture and interest, use a skewer or toothpick to make small indentations all over their surface
- Once you’re happy with the texture of your beads, set them aside to dry thoroughly overnight (or for at least several hours)
- 6String your beads onto some strong jewelry wire, leaving enough room at either end for attaching a clasp later on
- 7Use needle nose pliers to make tight loops at each end of the wire 8Finally, attach jump rings and clasps (of whatever type you prefer) to each end of the bracelet
How to make a clay beads bracelet with a clasp
How to Tie a Clay Bead Bracelet Without Glue
There’s no need to use glue when making a clay bead bracelet! All you need is some string and a few simple knots. Here’s how to do it:
1. Start by threading your string through the first bead. Make sure the bead is centered on the string.
2. Take the end of the string and tie it in a knot around the base of the bead.
Pull tight so that the bead is snug against the knot.
3. Repeat this process for each bead, adding one at a time until you have reached your desired length.
4. Once all beads are in place, take both ends of the string and tie them together in a double knot.
Trim any excess string and your bracelet is complete!
Credit: www.nbeads.com
How Do You Attach a Clasp to a Beaded Bracelet?
There are many ways to attach a clasp to a beaded bracelet. The most common is to use jump rings. To do this, you will need two jump rings and a pair of needle-nose pliers.
First, open one of the jump rings and thread it through the loop on the clasp. Then, thread it through the last bead on the bracelet. Close the jump ring by squeezing it together with the needle-nose pliers.
Repeat this process with the other jump ring, attaching it to the first bead on the bracelet.
Another way to attach a clasp is by using wire guardians. Wire guardians are small metal hoops that fit over wires or threads to protect them from wear and tear.
To attach a wire guardian, simply slip it over both ends of the wire or thread and then twist it closed. You can then add your beads and clasp as normal.
How Do You Make a Bracelet With Clay Beads?
If you’re looking to add a personal touch to your jewelry collection, or want to create a one-of-a-kind gift, then making bracelets with clay beads is a great option! In this tutorial we’ll show you how to make beaded bracelets using air-dry clay beads and stretch cord. These bracelets are quick and easy to make, and best of all – they won’t break the bank.
So let’s get started!
The first step is to gather your supplies. You’ll need:
– Air-dry clay in the colors of your choice (we used white, light blue, and dark blue)
– A rolling pin or something similar for flattening the clay beads
– A straw or toothpick for making holes in the beads
– Stretch cord (clear elastic beading thread works well)
Now that you have everything you need, it’s time to start crafting! Begin by taking small pieces of clay and forming them into balls.
These will be the beads for your bracelet. Once all of your balls are made, use the rolling pin (or whatever you’re using) to flatten them out into discs. Make sure they’re not too thin – they should be about 1/4 inch thick so that they’re sturdy enough to string.
Next, use the straw or toothpick to poke a hole through the center of each disc. The hole doesn’t have to be perfect – just big enough so that the stretch cord can go through it easily. If any of your discs crack while you’re making the holes, simply roll them into balls again and start over with flattening and punching holes.
How Do You Put Beads on a Clasp?
There are a few different ways that you can put beads on a clasp. The first way is to string the beads onto the wire, and then use pliers to twist the wire around the clasp. This method is quick and easy, but it is not as secure as some of the other methods.
Another way to put beads on a clasp is to thread them onto head pins, and then use pliers to bend the head pins around the clasp. This method takes a little bit longer, but it is much more secure.
The last way to put beads on a clasp is to glue them onto the clasp using jeweler’s glue or epoxy.
This method is very secure, but it can be difficult to get the beads to stay in place while they are drying.
How Many Beads Should Be on a Clay Bead Bracelet?
Assuming you are talking about a bracelet made with beads that are all the same size, here is what we recommend:
For a small wrist, use between 18 and 20 beads. For a medium wrist, use between 22 and 24 beads.
For a large wrist, use 26 or more beads.
Conclusion
Making your own clay bead bracelet is a great way to add a personal touch to your jewelry collection. Plus, it’s a fun and easy project that anyone can do! With just a few simple steps, you can create a beautiful and unique bracelet that’s sure to get compliments.
