To make a bike chain fidget toy with beads, you will need: -1/2 inch by 1/8 inch metal flat bar (or something similar) -a few feet of 3/32 or 1/16 inch diameter bike chain

-about 200 6mm beads -two small screws and nuts -needle nose pliers and wire cutters

First, cut the flat bar into two pieces that are each about four inches long. Next, use the needle nose pliers to make a small loop at one end of each piece of flat bar. Thread the bike chain through the loops on the flat bars, and then thread on the beads.

You can put them on in any pattern you like. Once all of the beads are on, twist the ends of the bike chain around so that they meet in the middle, and then use the wire cutters to trim off any excess chain. Finally, screw a nut onto each end of both pieces of flat bar to secure everything in place.

  • Gather your supplies
  • You will need a length of bike chain, some small beads, and two jump rings
  • Thread the beads onto the bike chain
  • Make sure to leave enough room at each end to attach the jump rings
  • Attach a jump ring to each end of the bike chain
  • Your bike chain fidget toy is now ready to play with!

Fidget Toys

Fidget toys are designed to provide a way for people to fidget without disturbing others. They can be used in the classroom, at work, or at home. Fidget toys come in a variety of shapes and sizes, and can be made from different materials.

Common fidget toys include: -Rubber bands: Rubber bands are a common type of fidget toy. They can be stretched and pulled, providing a way to release energy and tension.

-Paper clips: Paper clips can be bent and twisted, providing another way to release energy without making noise or disturbing others. -Pens: Pens with clickable tops are often used as fidget toys. The clicking sound provides auditory stimulation that can help focus attention.

-Toys with moving parts: Toys such as spinners and worry stones provide visual and tactile stimulation that can help calm anxiety or ease stress.

How to Make a Bicycle Chain

In order to make a bicycle chain, you will need the following materials: a length of chain, two master links, and a set of pliers. You will also need access to a bike stand or another method of lifting your rear wheel off of the ground. First, thread one end of the chain through the rear derailleur.

Then, take the other end of the chain and run it up through the front derailleur and around the largest cog on your cassette. Now, bring the chain back down and connect it to itself using one of your master links. Make sure that both ends of the master link are facing inwards so that they can be inserted into one another.

Next, use your pliers to squeeze both sides of the master link together until they are flush with one another. You may need to wiggle the link back and forth a bit in order to get it seated properly. At this point, your chain should be fully connected and ready to ride!

Flippy Chain Fidget Toy

Do you like to fidget? If so, you’ll love the Flippy Chain Fidget Toy! This toy is perfect for those who like to keep their hands busy.

It’s also great for helping to relieve stress and anxiety. The Flippy Chain Fidget Toy is made of high-quality materials and is very durable. It’s also easy to clean and comes in a variety of colors.

Diy Fidget Toys

When it comes to fidget toys, there are endless possibilities for DIYers. If you’re looking for a fun project to keep your hands busy, why not make your own fidget toy? With a little creativity, you can come up with a unique toy that is sure to provide hours of fun.

There are many different materials you can use to make a fidget toy. Some popular options include beads, buttons, and fabric scraps. You can also use recycled materials like old jewelry or small toys.

The sky is the limit when it comes to choosing materials for your project. Once you’ve gathered your supplies, it’s time to start creating! There are many different ways to assemble a fidget toy.

You can string beads together to create a bracelet or necklace. Or, you can sew buttons onto fabric scraps to make a pillow or stuffed animal. Get creative and see what you can come up with!

Making your own fidget toy is a great way to relieve stress and have some fun. So gather your supplies and get started today!

Bike Chain Fidget

A bike chain fidget is a great way to keep your hands busy while riding your bike. It is also a great way to relieve stress and anxiety. The best part about a bike chain fidget is that it is very affordable and easy to make.

You can make a bike chain fidget with just a few materials that you probably already have around the house. To make a bike chain fidget, you will need: -a length of bicycle chain -an old sock -a pair of pliers -scissors Start by cutting the sock into a long strip.

Then, wrap the strip around the middle of the bicycle chain. Use the pliers to pinch the ends of the sock together so that it stays in place. Trim off any excess sock material with the scissors.

That’s it! Now you have your very own bikechain fidget that you can use whenever you need it.

How to Make a Bike Chain Fidget Toy With Beads


How Do You Make a Bike Chain Fidget Toy?

Assuming you would like a step-by-step guide on how to make a bike chain fidget toy: You will need the following supplies: -1/8″ x 1″ flat aluminum bar (or any other similar size/shape)

-Bike chain (any size will do) -Super glue -Wire cutters

Instructions: 1. Cut the aluminum bar into 3 equal pieces using the wire cutters. These will be the sides of your fidget toy.

2. Cut 3 lengths of bike chain, each about 2 inches long. These will be the connecting links between the sides of your fidget toy. 3. Glue one end of each length of bike chain to an aluminum side piece.

Make sure that all the links are facing in the same direction. Allow to dry completely. 4. Once dry, connect the remaining ends of the bike chains together so that they form a triangle shape with the aluminum sides making up the three points of the triangle.

There you have it! Your very own DIY bike chain fidget toy!

How Do You Make Fidgets With Beads?

There are many ways to make fidgets with beads, but one of the most popular is to thread them onto a string or wire. This can be done with any type of bead, but larger beads are usually easier to work with. Once you have your beads threaded onto the string, you can then start to knot them together.

The knots will keep the beads from sliding around and falling off of the string. You can make as many knots as you like, and you can even add more beads to the string if you want to make a longer fidget.

How Do You Make Diy Fidget Toys?

If you’re looking for a fun and easy way to keep your hands busy, making your own fidget toys is a great option! Fidget toys are small objects that can be held in the hand and manipulated to help relieve stress or boredom. They can be as simple as a pipe cleaner twisted into different shapes or as elaborate as a miniature metal sculpture.

Making your own fidget toys is a great way to personalize them to your own liking, and it’s also much cheaper than buying ready-made ones. To get started, you’ll need some basic materials like scissors, tape, glue, and whatever else you want to use to decorate your toy. Pipe cleaners are an excellent choice for the core of your fidget toy because they’re flexible and easy to work with.

Once you’ve gathered your supplies, start by creating a basic shape with the pipe cleaners. You can twist them into coils, loops, or any other configuration you like. Once you’re happy with the shape of your toy, it’s time to start decorating!

One simple way to decorate your fidget toy is by wrapping it in colorful duct tape. This will not only add some visual interest, but it will also help keep the pipe cleaners together if they start to come apart. You can also glue on beads, buttons, or other small trinkets.

Get creative and have fun with it! When you’re finished decorating, give your new fidget toy a try – it just might become your new favorite stress reliever.

What Does a Bike Chain Fidget Do?

A bike chain fidget is a small, lightweight device that attaches to your bike chain and helps keep it from rattling. It’s a great way to reduce noise on your ride, and it can also help prolong the life of your chain.

DIY Bicycle Chain Fidget!❤🤪


If you’re looking for a fun and easy project to make with beads, try making a bike chain fidget toy. This project is great for kids and adults alike, and it’s a perfect way to use up those extra beads you have lying around. All you need to make this toy are some beads, a length of bike chain, and some pliers.

Simply string the beads onto the chain, using as many or as few as you like. Then, use the pliers to close the links of the chain so that the beads are secure. That’s it!

Your new fidget toy is ready to play with.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *