1. Cut a piece of string about 10 inches long. 2. Fold the string in half and tie a knot at the fold to create a loop. 3. String beads onto the two halves of the string until you have enough beads to fit comfortably around your finger.

Make sure to leave enough space at the end of each half of string so that you can tie them together later. 4. Once you have strung all your beads, tie the two halves of string together, being careful not to make the ring too tight or too loose. 5. Trim any excess string and enjoy your new beaded ring!

  • Decide on the size of ring you want to make and cut a piece of string accordingly
  • Choose the beads you want to use for your ring
  • String the beads onto the string, arranging them in the pattern or design you desire
  • Once all the beads are strung, tie the two ends of the string together, making sure it is tight enough that the beads will not fall off but not so tight that it will be uncomfortable to wear
  • Trim any excess string and enjoy your new beaded ring!

how to make beaded flower rings | Seed Bead DIY/ tutorial | studio vlog | tiffany_studies

How to Make Seed Bead Rings

Making seed bead rings is a fun and easy craft project that you can do at home. With just a few supplies, you can make beautiful, one-of-a-kind rings that are perfect for gifts or to keep for yourself. Here’s what you need to get started:

Supplies: -Seed beads in the colors of your choice (I used size 11/0 seed beads) -Headpins (I like using the ones with flat heads)

-Wire cutters -Round nose pliers Scissors may also come in handy. Instructions:

1. Start by threading your seed beads onto headpins. I used about 25 beads per headpin, but you can use more or less depending on the look you want. 2. Once all of your headpins are beaded, use wire cutters to trim the excess wire, leaving about ½” of wire at the end.

3. Use round nose pliers to create a loop at the end of each headpin. Make sure the loop is big enough so that it will fit over the mandrel (or whatever object you’re using to form your ring). 4. Now it’s time to start forming your rings!

You can do this by wrapping the beaded headpin around a mandrel (I used a wooden dowel), or even around your finger if you don’t have a mandrel handy. Just make sure not to wrap too tightly, as you want there to be some wiggle room when putting on and taking off your ring later on. 5. Once you have wrapped your bead around the mandrel (or finger), carefully slide it off and snip away any excess wire with wire cutters, leaving about ¼” – ½” of wire at the end again .

Use round nose pliers once more to create another loop, making sure it’s nice and secure this time so that your beads don’t fall off . And that’s it – one handmade seed bead ring complete! Repeat these steps until you have as many rings as desired .

How to Make a Beaded Ring With String

Credit: www.nbeads.com

What String Do You Use for Bead Rings?

There are a few different types of string that can be used for bead rings. The most common type of string is nylon thread, which is strong and durable. Another popular type of string is fishing line, which is also strong and durable.

However, fishing line can be difficult to work with because it’s so thin.

What Do You Need to Make Beaded Rings?

In order to make a beaded ring, you will need the following materials: -Beads (choose your favorite colors and sizes!) -Wire (we recommend 26 or 28 gauge)

-Wire cutters -Ring mandrel or dowel (this is used to create the perfect circle for your ring) -Nylon jaw pliers (these have smooth jaws that won’t damage your wire or beads)

First, decide how many beads you want to use for your design. Cut a piece of wire that is approximately 2 inches longer than this measurement. Next, thread your beads onto the wire, leaving about 1/2 inch of space at the end.

Once all of your beads are on the wire, use your nylon jaw pliers to gently bend the wire into a circular shape, making sure that all of the beads are facing outward. You may need to adjust them slightly as you go along. Finally, overlap the two ends of wire and twist them together tightly several times until they are secure.

Trim off any excess with your wire cutters and voila! Your new beaded ring is complete!

How Do You Make a Seed Bead Ring?

When it comes to making a seed bead ring, there are two popular methods that you can use. The first method is known as the peyote stitch, while the second method is called the brick stitch. Both of these methods are fairly easy to learn, and once you get the hang of them, you’ll be able to make all sorts of different designs.

The Peyote Stitch The peyote stitch is probably the most popular method for making a seed bead ring. To do this stitch, you’ll need two needles and some thread.

Start by threading your needle with about 18 inches of thread. Then, string on around 50 seed beads onto your needle. Once you have all of your beads threaded on, tie a knot at the end so that they don’t fall off.

Now it’s time to start stitching! Take your first needle and insert it through the second bead from the end (not counting the knot). Then, take your second needle and insert it through the next bead on your string.

You should now have both needles going through the same bead. Next, take your first needle and go over the top of the second needle before inserting it through the next bead down. Now take your second needle and do the same thing (go over top ofthe first needle before inserting it into the next bead).

Continue this pattern until you reachthe end of your thread or until you reachthe desired length for your ring. Once you’re finished stitching, tie off both ends securely with a knot and trim any excess thread. The Brick Stitch

The brick stitch is another popular method for making a seed bead ring. This method is similar tothe peyote stitch in that you will still need two needles and some thread; however,the way thatyou stringyour beads is slightly different. Start by threading one needle with around 18 inches ofthreadand then stringon around 50 seedbeadsonto thisneedle(just likebefore).Then take theseedbeadsonthisneedleandstringthemonto thesecondneedleas well(again leavingenoughthreadatoneendto securewithaknot).

How Do You Make a Flower Ring With String?

Making a flower ring with string is a fun and easy project that can be completed in just a few minutes. All you need is some string, scissors, and a small piece of wire. Follow these simple steps to make your own flower ring:

1. Cut a length of string that is long enough to wrap around your finger comfortably. You will also need about 6 inches of extra string for tying the knots. 2. Make a loop at one end of the string by folding it over and tying it in a knot.

This will be the center of your flower ring. 3. Wrap the string around your finger, making sure that the loop stays in the center. Once you have wrapped the string around your finger several times, tie another knot to secure it in place.

4. Cut off any excess string, then use the wire to create spirals on each side of the looped center. These spirals will form the petals of your flower ring! 5. Finally, fluff out the petals and enjoy your pretty new accessory!


This blog post has provided some great tips on how to make a beaded ring with string. By following these simple steps, you can easily create your own beautiful and unique piece of jewelry. With a little patience and practice, anyone can make a stunning beaded ring.

So get out there and start creating!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *