1. Cut a length of string or cord that is about twice the length of your desired bracelet. Fold the string in half and tie a knot at the center to create a loop. 2. String on your beads, placing them close together or spaced out as desired.

Once you have enough beads for the width of your bracelet, tie another knot at the end of the string to secure them in place. 3. To make the macrame knots, hold the two strings together and make a loop with one string around the other (like you would when tying your shoes). Pull through this loop with the other string to form a second smaller loop (again, like tying your shoes).

Then pull both loops tight so that the bead is snug against the first knot. Repeat this process until you reach the end of your bracelet or until you have made enough knots to cover the entire surface area of your beads (whichever comes first). 4. Tie off each end of your bracelet with a knot and trim any excess string.

Your beaded macrame bracelet is now complete!

  • Start by threading your beads onto the beading thread
  • Make sure to leave about 6 inches of slack at the end of the thread
  • Once all of your beads are on the thread, tie a knot at one end to secure them in place
  • To start your macrame bracelet, you will need to make a square knot
  • Take the left strand and cross it over the middle strand
  • Then take the right strand and cross it over the new middle strand (which used to be the left strand)
  • Pull all four strands tight
  • Next, add another bead to each outer strand and make another square knot using the same steps as before
  • Repeat this process until your bracelet is as long as you want it to be!

Easy Macrame Bracelet With Beads Tutorial

Macrame bracelets are a fun and easy way to add some personality to your jewelry collection! This tutorial will show you how to make a bracelet with beads, using basic macrame knots. You can use any type of beads you like – I went with bright and colorful ones to match the vibrant summer vibe.

To make this bracelet, you will need: – 30 yards of 4mm cord (I used cotton macrame cord) – scissors

– approximately 50 beads (mine were 6mm in diameter) – tape (optional) Start by cutting two pieces of cord, each 15 yards long.

Tie a knot at one end of each piece, leaving a 2-inch tail. Tape the tails down to a flat surface, such as a table or countertop. This will help keep the cords from slipping while you work.

Next, thread your beads onto one of the cords. I found it helpful to bunch them together in small groups, making sure that each group had an even number of beads. Once all of the beads are threaded on, tie another knot at the end of the cord, again leaving a 2-inch tail.

Now it’s time to start knotting! Take the two ends of cord and tie them together with a square knot (also called a reef knot). Pull tight so that the bead is snug against the knot.

Continue tying square knots until you’ve reached your desired bracelet length – mine was about 7 inches long. To finish off, tie another square knot and trim the excess cord tails close to the Knots.

How to Make Adjustable Macrame Beaded Bracelets

Making your own adjustable macrame beaded bracelet is easy and only requires a few supplies. You’ll need some beads, cord, and a clasp. Start by threading your beads onto the cord.

Once all of the beads are on, tie a knot at one end of the cord. Then, make a loop with the other end of the cord and attach your clasp. That’s it!

Your bracelet is now adjustable and will fit any wrist size.

Youtube Macrame Bracelet With Beads

Macrame bracelet with beads is a great way to add some personality to your jewelry collection. With just a few supplies and some patience, you can create beautiful bracelets that are perfect for any occasion. Here’s what you’ll need to get started:

– Macrame cord or hemp twine – Beads (I used 6mm glass beads) – Scissors

– Tape measure or ruler – Lighter (optional) Start by measuring out about 2 feet of macrame cord.

Cut the cord and tie a knot at one end. This will be the end that you start beading from. String on your beads, making sure to leave enough space at the end of the cord to tie another knot.

Once all of your beads are strung on, tie a second knot at the other end of the cord. Trim any excess cord and use a lighter to carefully melt the ends of the knots (this will prevent them from coming undone). Your bracelet is now complete!

Macrame Bracelet Patterns

Macrame bracelets are a fun and easy way to add a personal touch to your jewelry collection. With just a few simple supplies and some basic macrame knots, you can create beautiful bracelets in any color or style you like. If you’re new to macrame, start with one of these beginner-friendly bracelet patterns.

Once you’ve mastered the basics, you can experiment with different knotting techniques and embellishments to make your bracelets even more unique. Looking for some inspiration? Check out these 10 stylish macrame bracelet patterns:

1. Simple Beaded Macrame Bracelet This pretty bracelet features beads strung onto thread and tied together with basic macrame knots. It’s a quick and easy project that’s perfect for beginners.

(via A Beautiful Mess) 2. Chevron Macrame Bracelet This modern bracelet uses the chevron stitch to create its geometric design.

It looks much more complicated than it actually is – once you get the hang of it, you’ll be able to whip up this bracelet in no time! (via Dream a Little Bigger) 3. Friendship Macrame Bracelet Friendship bracelets are classic for a reason – they make great gifts!

This particular friendship bracelet pattern uses two colors of thread for an added pop of color. (via Happiness is Homemade) 4. Braided Rope Macrame Bracelet This nautical-inspired bracelet is made with braided rope instead of traditional string or thread .

It gives the bracelet a bit more texture and interest . ( via Sprinkled Joy ) 5 . Tassel Macramé Bracelet Tassels are all the rage right now , so why not add them to your macramé jewelry ? This tasseled bracelet is fun and festive – perfect for summertime wear . ( via Delia Creates ) 6 . Infinity Knot Macramé Bracelet The infinity knot is one of the most popular macramé knots , so it’s only fitting that it would make an appearance in this roundup ! This simple yet elegant bracelet can be made in any color combination you like . ( via Flax & Twine ) 7 . Geometric Pattern Macramé Bracelet Want something a little more challenging ?

Macrame Bracelet With Charm

If you’re looking for a fun and unique DIY project, why not try your hand at making a macrame bracelet with charm? This type of bracelet is perfect for personalizing with your own charms, beads, and other embellishments. Plus, it makes for a great gift!

To get started, you’ll need some basic supplies including: cord (we recommend using 4mm or 6mm), scissors, charms, and beads. Once you have your supplies gathered, simply follow these steps: 1. Cut two pieces of cord to equal length (around 18 inches each).

Fold the cords in half and tie a knot at the center. This will be the base of your bracelet. 2. Next, take one of the cords and make a loop around the other cord (as if you were tying a shoelace).

Pull tight and secure with a knot. Repeat this step with the other cord. You should now have two loops on either side of your bracelet base.

3. To add charms or beads to your bracelet, simply thread them onto one of the cords before making another loop around the other cord. Continue adding loops until your bracelet reaches desired length. Finally, tie off both cords with knots and trim any excess cordage.

How to Make a Beaded Macrame Bracelet

Credit: crystalsandclay.com

How Do You Make a Beaded Bracelet for Beginners?

One of the most popular jewelry trends right now is bracelets made with beads. If you’re interested in learning how to make your own beaded bracelet, there are a few things you need to know first. In this blog post, we’ll walk you through everything you need to get started, from picking out the right beads to choosing the right tools.

By the end, you’ll be ready to create your own beautiful beaded bracelets! When it comes to picking out beads for your bracelet, there are endless possibilities. You can choose from glass beads, metal beads, stone beads, or even plastic beads.

It’s important to pick a material that you’re comfortable working with and that will complement the other elements of your bracelet design. For example, if you’re planning on adding charms or pendants to your bracelet, glass or metal beads would work well. If you want a more natural look, stone or wood beads might be a better choice.

Once you’ve chosen your bead material, it’s time to pick out the actual beads! There are so many different shapes, sizes and colors of beads available that it can be overwhelming at first. Try to narrow down your options by considering what kind of look you want for your bracelet.

Do you want something colorful and fun? Or do you prefer a more understated look? Once you’ve decided on the overall style of your bracelet, picking out individual beads will be much easier.

Once you have all of your materials gathered together, it’s time to start making your bracelet! The first step is creating what’s called a “beading needle.” This is simply a long needle with a large eye that can easily fit multiple strands of thread through it.

To make one yourself, simply take a regular sewing needle and file down the eye until it’s large enough to accommodate multiple strands of thread (we recommend using jewelry pliers for this). Once you have your needle ready, cut two lengths of thread about 18 inches each (this will give you plenty of room to work with). Tie one end of each piece of thread onto opposite sides of the needle eye so that they’re secure (again, jewelry pliers can come in handy here). Now string all of your chosen beads onto both pieces of thread until each strand is full (you can leave some extra space at either end so that you have room to tie knots later).

How Do You Make a Beaded Cord Bracelet?

Assuming you would like a tutorial on how to make a beaded bracelet with a cord: What you need: -Beads of your choice (I used 6mm fire polished beads in three colors)

-Stringing material of your choice (I used 0.7mm clear stretch beading cord) -Scissors -Lighter

Instructions: 1. Cut a comfortable length of stringing material, leaving about 10 inches extra. Fold the string in half and tie an overhand knot at the fold to create a loop. String on as many beads as desired onto one side of the string, then thread the other side of the string through those beads so that both sides are now going through all the beads (see first photo).

Once all the beads are strung, pull both sides of string until they’re flush against each other and tie another overhand knot, snugging it up against the first row of beads (second photo). Trim away excess string. 2. Thread one side of the string through all the beads again, this time going in the opposite direction from before (third photo).

As before, once you’ve gone through all the beads, pull both sides until they’re flush and tie another overhand knot next to previous knots (fourth photo). Trim away excess string and use lighter to carefully melt ends of nylon cord so they don’t fray. Your bracelet is now complete!

How Do You Make a Square Knot Beaded Macrame Bracelet?

If you want to make your own square knot beaded macrame bracelet, you’ll need some basic supplies. You’ll need cord or string, beads, and a clasp. You’ll also need a pair of scissors and something to keep the beads from sliding off the cord while you’re working (tape works well for this).

Once you have your supplies gathered, follow these instructions: 1. Cut a length of cord or string that will wrap comfortably around your wrist several times with some extra length to spare. Make sure to leave enough length so that you can tie a secure knot at the end.

2. Slide beads onto the cord until you have enough for the entire bracelet. It’s helpful to plan out the pattern before adding all the beads. 3. To make a square knot, start by making an “overhand” knot about 2 inches from one end of the cord.

Then take the long end of the cord and make another overhand knot over top of it, but don’t pull it tight just yet! Take the second loop formed by this second overhand knot and thread it underneath the first loop (which should still be loose). Now pull both ends of the cord to tighten everything up – this forms one half of a square knot.

4To complete the other half of the square knot, take the left-most strand and make another overhand loop above everything else – again, don’t pull it too tight just yet! Take the right-most strand and thread it through this new loop from below (so it comes out on top), then pull both strands to tighten everything up – congrats, you’ve just made a square knot! 5. Continue adding square knots until you reach desired bracelet length, then finish off with another secure overhand knot.

Trim any excess cord and enjoy your new bracelet!

What are the Steps in Making a Macrame Bracelet?

Assuming you would like a basic guide on how to make a macrame bracelet: What You Need: -6 Strands of Embroidery Floss (18 inches each)

-Scissors -Tape Measure or Ruler -Lighter

Instructions: 1. Fold all 6 strands in half and tie them together with an overhand knot, about an inch from the end. This will be the center of your bracelet.

2. Take the left outside strand and bring it over two other strands to the right. Now take the right outside strand and bring it over two other strands to the left. Continue this pattern until you reach the end of your bracelet.

Make sure that you pull each new knot tight against the previous one. 3. To finish off your bracelet, cut all remaining tails close to the knots and use a lighter to carefully singe any loose ends so they don’t unravel later on!

How to make macrame bracelet with beads | Macrame friendship band | #DIY Thread bracelet


This blog post was very informative and provided detailed instructions on how to make a beaded macrame bracelet. The author included photos with each step which made the process easy to follow. I enjoyed learning how to make this type of bracelet and would recommend it to others.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *