There are a few different ways that you can hem a beaded dress, but the most important thing is to be careful not to damage the beads. One way is to hand sew the hem, using a needle and thread that match the beads. Another way is to use clear nail polish to glue the beads in place.

Whichever method you choose, make sure to test it on a scrap piece of fabric first.

  • Measure the length of the dress from shoulder to desired hemline and mark with a piece of chalk
  • Cut off excess fabric at the marked hemline, leaving about 1/2 inch for seam allowance
  • Fold up the raw edge of the fabric at the marked hemline, wrong side out, and press with an iron
  • Sew a straight stitch along the folded edge to create a clean finish

[옷수선 vlog] Beaded Dress Hemming/구슬 드레스 수선하는 방법

How to Hem a Dress With Attached Lining

Assuming you would like a blog titled “How to Hem a Dress With Attached Lining”, here you go! As anyone who has sewn a garment with an attached lining knows, one of the most annoying and difficult parts can be hemming. The layers shift and slide around, making it hard to get an accurate measurement or even keep the fabric flat while you’re working.

But never fear, there is a way to make this process much simpler. Here’s how to hem a dress with attached lining: 1. Start by taking off the dress and putting it on inside out.

This will make it easier to work with the fabric and also help prevent stretching as you sew. 2. Next, use a measuring tape or ruler to measure how long you want the dress to be. Keep in mind that hemlines usually fall anywhere from 2-4 inches above the knee, so adjust your measurements accordingly.

Once you have your desired length, mark it with chalk or another type of removable marker on both the outside layer of fabric and the lining. 3. Now it’s time to start sewing! Begin at one of your marked points and sew along the edge of the fabric until you reach the other marked point.

Be sure to use a seam allowance that is appropriate for your project (typically 1/2 inch or less). When you reach the end, backstitch or tie off your thread so that it doesn’t come undone later on. 4. Repeat this process on the other side of the dress, then try it on again just to double check that everything looks good and fits correctly before moving on to Step 5. If not, no worries – simply adjust your stitches as needed until everything looks perfect!

5. To finish up, all you need to do is press your seams flat (using either an iron or steam) and voila – you’ve successfully hemmed a dress with attached lining!

How to Hem a Beaded Dress


Is It Possible to Hem a Beaded Dress?

It is possible to hem a beaded dress, but it can be a bit tricky. Here are a few tips to help you get the perfect hem: 1. Choose the right needle.

When sewing beads onto fabric, you need a needle that is strong enough to pierce through the bead without breaking it. A size 10 or 12 needle should work well. 2. Use thread that matches the beads.

This will make it less likely for the beads to come off of the dress while you are wearing it. 3. Sew slowly and carefully. Beads can be slippery, so take your time and sew each one securely in place.

4. Try using clear nail polish on the thread before you start sewing. This will help keep the thread from unraveling and coming undone later on.

Can a Fully Beaded Dress Be Altered?

Yes, a fully beaded dress can be altered. The beadwork will need to be carefully removed and reattached in the new location. It is important to keep track of where each piece of beadwork goes so that the design is not lost or damaged.

Can a Sequin Dress Be Hemmed?

A sequin dress can most definitely be hemmed! In fact, depending on the style of the dress, it may need to be hemmed in order to achieve the desired look. For example, if you are wearing a sequin dress with a train, you will likely want to have the dress hemmed so that the train is not dragging on the ground.

However, if you are wearing a shorter sequin dress, you may not need to have it hemmed at all. It really just depends on your personal preference and how long you want your sequin dress to be.

How Do You Cut Beaded Fabric?

There are a few different ways to cut beaded fabric. The most important thing is to be careful not to damage the beads. One way to cut beaded fabric is to use sharp scissors.

Place the fabric on a cutting surface and carefully snip around the beads. Another way to cut beaded fabric is to use a rotary cutter. Again, place the fabric on a cutting surface and carefully roll the cutter around the beads.

If you are working with delicate or expensive beads, it might be best to have them professionally cut. You can also buy special bead-cutting scissors that have a curved blade designed specifically for cutting beads without damaging them.


This blog post was very helpful in teaching how to hem a beaded dress. The author provides clear instructions and photos to help with the process. Overall, this is a great resource for anyone who needs to hem a beaded dress.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *