Cut a small circle out of the felt. Make a small hole in the center of the circle with a needle. String beads onto thread and tie the thread through the hole in the felt.

Repeat for other earring.

  • Cut a small piece of felt to the desired shape for your earrings
  • Select the beads you want to use and thread them onto a needle
  • Sew the beads onto the felt, using a running stitch or other similar stitches
  • Finish off the thread and knot it securely
  • Trim any excess thread from the back of the earrings

Flat Beading with Cabs Tutorial | Part 1 | Art by Breanna Deis

How to Make Beaded Earrings Beginner

Making beaded earrings is a great way to get started in the world of jewelry making. Beaded earrings are relatively simple to make and only require a few basic supplies. With just a little time and effort, you can create beautiful, one-of-a-kind earrings that will add a touch of style to any outfit.

Supplies Needed: -Beads (choose your favorite colors and styles) -Headpins or eyepins (these will act as the “stem” for your earrings)

-Wire cutters or pliers (to trim excess wire) -Earring hooks (found at most craft stores) Instructions:

1. Start by selecting the beads you want to use for your earrings. Choose two beads for each earring – one large bead and one smaller accent bead. You can mix and match different colors, sizes, and shapes of beads to create unique looks.

Tip: It’s always best to practice with less expensive beads first until you get the hang of things. 2. Once you’ve selected your beads, it’s time to thread them onto the headpin or eyepin. To do this, simply slide the bead(s) onto the wire, leaving about 1/4 inch of wire at the end.

Tip: Use pliers to slightly bend the end of the wire so that your beads don’t slide off easily. 3. Next, use your wire cutters or pliers to trim away any excess wire, leaving about 1/2 inch remaining. Now it’s time to create a loop in the wire so that we can attach our earring hook later on.

To create a loop, hold the end of the wire with your pliers and begin wrapping it around itself until it forms a small loop shape (as shown in photo below). Make sure that your loop is big enough so that it can easily slip over an earring hook later on but not too big that it won’t stay secure once everything is put together! 4Once you’ve created your loops, it’s time to add your earring hooks! Simply open up the loop with your pliers and slip on an earring hook before closing up the loop again tightly . That’s all there is to it! Your new beaded earrings are now complete!

How to Bead Earrings on Felt


Can You Bead on Felt?

Yes, you can bead on felt. Felt is a great material to use for beading because it’s very sturdy and doesn’t tear easily. You can either sew beads onto felt or glue them on.

If you’re using beads with large holes, you’ll need to use a needle and thread to sew them onto the felt. If you’re using smaller beads, you can use a bead glue or fabric adhesive to attach them.

How Do You Attach Beads to Earrings?

There are a few different ways that you can attach beads to earrings. One way is to use a needle and thread to string the beads onto the earring wire. Another way is to use jewelry pliers to open up the loop on the earring and add the beads directly onto it.

You can also buy pre-made beaded earrings where the beads are already attached.

How Do You Put Beads on Dangle Earrings?

There are a few ways to put beads on dangle earrings. The first way is to thread the bead onto the earring wire. To do this, you will need a needle and some thread.

String the bead onto the thread, then thread the needle through the bead. Pull the thread until the bead is close to the end of the wire. Repeat with another bead if desired.

The second way to put beads on dangle earrings is by using jump rings. Jump rings are small metal loops that can be opened and closed. Open a jump ring and slide it through both the hole in the bead and then through the loop at the end of your earring wire.

Close the jump ring back up again. Repeat with another jump ring and another bead if desired. The third way to put beads on dangle earrings is by using eyepins.

Eyepins are thin wires with a small loop at one end. Thread a bead onto an eyepin, then bend the eyepin so that there is a 90 degree angle between the body ofthe pin andthe wire sticking out withthe bead on it . Trim any excesswire off, leaving about 1/4 inch (6 mm).

Using pliers, gripthe veryendofthiswireand makeanother90degreebendto createa loop . Thisisnowaclearloopedeyepinwithabeadattachedtothe bottom .

What to Use for Backing on Beaded Earrings?

There are a few different options for backing on beaded earrings. The most common is probably a simple plastic disc with a flat pad on the back that you press the earring post into. You can also get metal backs that screw onto the earring post or clip-on backs that pinch onto the earring.

Whatever type of back you use, just make sure it’s tight so the earring doesn’t fall off.


This post provides clear instructions on how to make beaded earrings on felt. It includes step-by-step photos and explanations of the materials needed. With this tutorial, anyone can create beautiful, one-of-a-kind earrings.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *