There are many ways to bead a flower. One popular method is to string beads onto wire or thread and then shape the beads into a flower design. This can be done by hand or with the help of pliers.

Another way to bead a flower is to create a flat, beaded design and then sew it onto fabric or another surface. Beaded flowers can also be made by layering different colors and sizes of beads on top of each other and then stitching them together.

  • Decide on the size and shape of your flower
  • This will determine how many beads you need and what kind of wire to use
  • String your beads onto the wire, leaving a bit of extra at the end
  • Once all your beads are strung, start bending the wire to form the petals of your flower
  • Keep bending and shaping until you’re happy with the overall look of your flower
  • Trim off any excess wire, and then enjoy your pretty new bead flower!

How to Make Flower Bead Bracelet

Making a flower bead bracelet is a fun and easy project that you can do at home. You’ll need some basic supplies, including beads, wire, and pliers. Once you have your supplies, follow these simple steps to make your own beautiful bracelet.

1. Begin by threading your beads onto the wire. Make sure to leave enough space at the end of the wire so that you can wrap it around the other end when you’re finished. 2. Once all of your beads are on the wire, start wrapping the excess wire around the other end of the bracelet.

Wrap it tightly so that the beads don’t fall off. 3. Use your pliers to clip off any excess wire, and then tuck in the sharp ends so they don’t poke you or catch on anything. Your flower bead bracelet is now complete!

Wear it alone or stack it with other bracelets for a fun and stylish look.

Seed Bead Flower Tutorial

This is a seed bead flower tutorial that will show you how to make a beautiful flower using only seed beads. You will need: – Seed beads in two colors (I used white and green)

– A needle – Thread – Scissors

1. Start by threading your needle with a long length of thread. Then string on a small handful of beads in one color – these will be the center of your flower. Once you have added all the beads, tie the thread off in a knot to secure them in place.

2. Now it’s time to start adding the petals! To do this, string on 3 or 4 beads in your second color, then skip over 1 bead from the first color (the ones you already added for the center). String on another 3 or 4 beads in your second color, then again skip over 1 bead from the first color.

Keep going until you’ve made 5 or 6 petals around the outside of your central beads. 3. Once you’re happy with the number of petals, cut off your thread and tie it in a knot to secure everything in place. Your pretty seed bead flower is now complete!

Beaded Flower Necklace Tutorial

This beaded flower necklace tutorial is a great way to add some pizzazz to your wardrobe! With just a few inexpensive supplies and some simple techniques, you can create a beautiful piece of jewelry that is perfect for any occasion. First, gather your materials.

You will need: seed beads in two colors, wire, wire cutters, needle nose pliers, and a clasp. I used size 11/0 seed beads in magenta and green. You will also need a bead mat or other surface to keep your beads from rolling away while you work.

Once you have all of your materials gathered, it’s time to start stringing those beads! String approximately 30 magenta beads onto one piece of wire. Then string 15 green beads onto the same wire, followed by another 30 magenta beads.

Make sure that all of the knots are tight so that your flowers don’t fall apart later on. Now it’s time to start shaping our flowers. Take the wire with the strung beads and wrap it around itself 2-3 times, depending on how large you want your flower to be.

Cut off any excess wire, leaving yourself about an inch or so to work with. Use needle nose pliers to twist the wires together at the base of the flower (where all of the wraps are). This will help secure everything in place.

Repeat this process until all six flowers are made. To finish up our necklace, we just need to add our clasp and attach our flowers. Cut two pieces of wire – one should be long enough to reach from one end of the necklace to the other (including going over your head), and the other should be long enough to reach from one side of the necklace to the center front (this will be used as an extender chain).

Use needle nose pliers again to attach each end of both wires securely into each loop at either end of our foundation strand where our clasp will go (on either side). The last step is optional – but if you would like an extender chain on your necklace so that it can adjust to different necklines easily, simply take that second length of wire and attach it between two loops near the center front using jump rings or by twisting them together securely with needle nose pliers once again . And that’s it!

Daisy Bead Bracelet Tutorial

This bracelet is made with 6mm fire-polished Czech daisy beads and 11/0 seed beads. It’s a very quick and easy bracelet to make, perfect for beginners! You will need:

6mm fire-polished Czech daisy beads 11/0 seed beads Size 10 beading needle

Thread of your choice (I used FireLine 6 lb.) Scissors or thread cutter Instructions:

1. Cut a length of thread about 2 feet long and thread it through your needle. Leave a tail of about 6 inches. 2. String on 60 seed beads, then tie the two ends of the thread together in a knot, leaving a loop at one end.

Be sure to leave enough slack so that you can easily slide the daisy bead onto the thread later on. 3a. To make the first half of the bracelet, string on 5 daisy beads and then skip over 4 seed beads.

Repeat this pattern until you reach the end of the row (you should have 15 total daisy beads). 3b. To make the second half of the bracelet, string on 4 seed beads and then skip over 5 daisy beads.

Repeat this pattern until you reach the beginning of the row (you should again have 15 total daisy beads). Now both halves of your bracelet should look identical! 4a. Once you’ve reached the beginning again, string on 1 more seed bead and then go back through all of the previousdaisy beadsthat you skippedoverin step 3a(so essentially stringingon5daisybeadsand4seedbeads alternately). Make sure to go throughtheloopsat either end as well! 4b. Stringon1moreseedbeadandgobackthroughallofthepreviousdaisy beadsthatyouskippedoverinstep3b(soessentiallystringingon4seedbeadsand5daisies alternately).Make suretogothe loopsat eitherendaswell!

How to Make Flower Bracelet With String

Who doesn’t love a pretty bracelet? And what could be more lovely than one made with flowers? Today, we’ll show you how to make a flower bracelet with string.

This project is perfect for a springtime activity or as a gift for Mother’s Day. You’ll need: – 2 yards of thin ribbon or string

– 1/3 cup of glue – A selection of fresh flowers (we used daisies) – A small paintbrush

– Scissors Start by cutting your ribbon or string into equal lengths. We cut ours into 18″ pieces.

Then, use the paintbrush to apply glue to one end of each piece of string. It’s important to not use too much glue, or it will seep through the flowers and make them sticky. Now, start adding your flowers!

We found that it was easiest to add the flower heads first, then tuck in the stems behind them. Once you’ve added all of your flowers, allow the glue to dry completely before wearing your beautiful new bracelet!

How to Bead a Flower


How Do You Make a Flower Bead Step by Step?

Assuming you would like a tutorial on how to create a flower bead: What You Need: -Oven-Bake Polymer Clay (You can find this at any craft store in the clay section)

-Rolling Pin -Wax Paper or Parchment Paper -Cookie Cutters (optional)

-Toothpick or Skewer -Acrylic Paint and Paintbrush (optional) Instructions:

1. Preheat your oven to 275 degrees Fahrenheit. 2. Take your block of oven bake polymer clay and begin rolling it out with a rolling pin on top of a piece of wax paper or parchment paper. If you’re using cookie cutters, now is the time to cut out your desired shape.

3. Once you have your shape, use a skewer or toothpick to make a hole at the top of the bead. This is important because later you will be stringing these beads together 4. Place your beads on a baking sheet lined with parchment paper and bake for 15 minutes

5. Remove from oven and let cool completely 6.(Optional Step) Once cooled, you can paint your beads with acrylic paint! Let dry completely before moving on to the next step 7. String your beads together to create beautiful jewelry or decorations!

How Do You Thread a Flower With Beads?

If you want to add a touch of elegance to a bouquet or corsage, threading beads onto the stems is a great way to do it. It’s not difficult, but there are a few things to keep in mind. Here’s how to thread flowers with beads:

1. Choose your beads. Smaller beads work best, as they’re less likely to weigh down the stem and cause the flower to droop. You can use any type of bead, but glass or metal ones work best as they won’t absorb water like plastic beads would.

2. Cut a length of beading wire. You’ll need enough wire to wrap around the stem several times, plus an extra inch or two for securing the ends. 3. String the beads onto the wire.

Slide them down so they’re close together, leaving about 6 inches of wire at one end for wrapping around the stem later on. 4. Wrap the beaded wire around the stem of the flower, secured at both ends with a small piece of floral tape or Wirecutters (for stems with thicker wires). Make sure that all of the wraps are going in the same direction so that they don’t get tangled when you try to arrange them later on.

5) Trim off any excess wire and enjoy your beautiful beaded flowers!

How Do You Seed a Bead Flower?

When it comes to seeding a bead flower, there are a few things that you will need to keep in mind. First and foremost, you will need to make sure that you have the right type of beads. There are two types of beads that are commonly used for this purpose – seed beads and bugle beads.

Seed beads are smaller in size and have a smooth surface, while bugle beads are larger and have a ridged surface. Next, you will need to thread your needle with beading thread. You can use either nylon or polyester thread, but nylon is stronger and less likely to break.

When selecting your thread, make sure that it is the same color as the beads you will be using so that it blends in nicely. Once you have everything gathered together, it’s time to start stringing your beads! Start byThreading your needle through the first bead, then add on as many more as you want until your flower reaches the desired size.

When you’re happy with the size of your flower, knot off the end of the thread securely so that your beads don’t fall off. And there you have it – a beautiful bead flower that you created yourself!

How Do You Bead a Daisy?

When it comes to beading, there are all sorts of different designs that you can create. One popular design is the daisy. Daisies are a symbol of innocence and purity, making them a popular choice for beaded jewelry.

If you’re wondering how to bead a daisy, wonder no more! Here is a step-by-step guide on how to create this beautiful design: 1) Start by threading your needle with the beading wire of your choice.

Cut off a piece of wire that is about 18 inches long. This will give you plenty of room to work with and also leave enough wire at the end so that you can attach a clasp later on. 2) Next, string on 11 seed beads onto the wire.

These will form the center of your daisy. Once you have all 11 beads strung on, make a loop with the wire and pass the tail end through the first seed bead again (this creates a secure connection). Then, snip off any excess wire.

3) Now it’s time to start adding in the petals. For each petal, string on 3 bugle beads followed by 1 seed bead. Make sure that each petal is facing downwards as you add them onto the wire (this will ensure that they lay flat once completed).

You should have 5 petals total when finished. 4) To secure the petals in place and create some separation between them, string on 2 seed beads in between each petal section. Finally, make another loop at the end of the wire and pass it through the first seed bead again before trimming off any excess length.

How to make a DAISY CHAIN flower bracelet | Easy beaded 90s jewelry DIY


This post was very informative and easy to follow. It is a great tutorial for anyone wanting to learn how to bead a flower. The author provides clear instructions and plenty of photos to help guide the reader through the process.

By the end of the post, you should have everything you need to know in order to make your own beaded flowers.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *