There are a few different ways to put on a captive bead ring, but the most common is to use two needles. To do this, you will need to thread one needle through the hole in the ring, and then thread the other needle through the bead. Once both needles are through the bead, you can pull them both until the bead is in the center of the ring.
Then, simply twist the needles together to secure the bead in place.
- Open the ring by gently pushing the captive bead out of its setting with a blunt object, such as a pen or pencil
- Insert the captive bead into the desired location on your body piercing
- Gently push the bead back into its setting
- Close the ring by pinching the two ends together until they meet flush
How to Put a Ball Closure Ring in Septum
If you’re looking to add a little extra pizzazz to your septum piercing, then you might want to consider adding a ball closure ring. While this type of jewelry is not for everyone, it can be a great way to change up your look and add some extra personality to your piercing. Here’s everything you need to know about how to put a ball closure ring in your septum piercing.
Septum piercings are typically done with a curved barbell, which is easy to insert and remove from the piercing. A ball closure ring, on the other hand, has a small ball on each end that snaps into place, holding the jewelry in place. This can make putting in a ball closure ring slightly more difficult than inserting a barbell, but it’s definitely doable with a little patience (and maybe a friend or two to help out).
To start, wash your hands thoroughly and sterilize the ball closure ring using an alcohol pad. Next, carefully insert the straight side of the ring through your septum piercing hole. Once the straight side is through, gently bend the ring into shape so that both balls are on either side of your septum.
You may need someone else to help hold the ends of the ring in place while you do this step. Finally, press both balls firmly into place until they click and lock into place. That’s it!
You’ve successfully put in your new ball closure ring!
How to Put in Captive Bead Ring Without Pliers
If you’re looking to put in a captive bead ring without using pliers, there are a few things you’ll need to do. First, thread the needle with beading wire. Second, make a small loop at the end of the wire.
Third, insert the wire through the hole in the bead, and then through the hole in the ring. Fourth, pull the wire tight so that the bead is snug against the ring. Fifth, make another small loop at the end of the wire and trim excess.
How to Put on a Captive Bead Ring Septum
If you’re looking to add a little edge to your look, consider a captive bead ring septum piercing. This type of piercing is growing in popularity, thanks to celebrities like Rihanna and Cara Delevingne who have been rocking the style. While it may look intimidating, a captive bead ring septum piercing is actually quite easy to put on – once you know how.
Here’s a step-by-step guide:
1. Choose your jewelry. Captive bead rings are available in a variety of sizes, metals and colors.
It’s important to choose jewelry that is made from high quality materials – otherwise you risk irritation or infection. If you’re new to piercings, it’s best to start with a small size until your septum has healed completely.
2. Wash your hands thoroughly before handling the jewelry or inserting it into your nose.
This will help prevent infection.
3. Open up the captive bead ring by gently squeezing the two ends together (you may need pliers for this). Once the ring is open, slide it through the hole in your septum (piercing should be done by a professional).
Make sure that the ball sits on top of your septum – this will keep the jewelry in place once it’s closed again.
4 Use pliers to close the captive bead ring back up – make sure that the ball is securely fastened so that it doesn’t fall out. And that’s it!
You’ve successfully put in a captive bead ring septum piercing!
How to Open a Captive Bead Ring Without Pliers
If you’re new to body piercings, the thought of using pliers to open a captive bead ring (CBR) might be daunting. But don’t worry – it’s actually quite easy! Here’s a step-by-step guide on how to open a CBR without pliers:
1. Locate the small opening at the bottom of the ring. This is where you’ll insert your finger.
2. Insert your finger into the opening and apply pressure to pop open the ring.
3. Once the ring is open, carefully remove it from your piercing.
4. To close the ring, simply press it back together until it clicks into place.
That’s all there is to it!
With a little practice, you’ll be able to open and close CBRs like a pro in no time.
How to Put a Captive Bead Ring in Your Nose
If you’re considering a captive bead ring for your nose, there are a few things you should know before taking the plunge. Here’s a step-by-step guide on how to put a captive bead ring in your nose:
1. Start with clean hands and sterilized jewelry.
It’s important to avoid introducing any bacteria into your piercing.
2. Insert the straight end of the jewelry through the piercing hole.
3. Gently slide the captive bead into place on the other side of the jewelry.
The tension of the bead should keep it in place.
4. Check that the bead is secure and centered before trimming off any excess jewelry.
Credit: www.etsy.com
How Do You Fasten a Captive Bead Ring?
If you’re new to body piercings, the thought of inserting a needle through your skin may be daunting. But don’t worry – with proper care and handling, getting a piercing is usually pretty easy and low-risk. One type of piercing that has become increasingly popular in recent years is the captive bead ring (CBR).
CBRs are circular rings that have a small “bead” or ball in the center, which can be removed when the ring is opened. This makes them easy to put in and take out, which is why they are a good choice for people who are new to piercings.
To fasten a captive bead ring, first wash your hands thoroughly with soap and water.
Then, unscrew the ball or bead from the ring so that you have two separate pieces. Next, insert the straight part of the ring through your piercing from front to back. Once the ring is through, screw on the ball or bead until it’s snug against your skin.
Finally, twist or push the ends of the ring together until they click into place.
That’s all there is to it! With proper care and cleaning, your captive bead ring should heal quickly and last for many years to come.
How Do You Put a Captive Bead Ring Back In?
If you’re struggling to put your captive bead ring (CBR) back in, don’t worry – you’re not alone. It can be tricky to do, especially if your CBR is on the smaller side. But with a little patience and some practice, you’ll be able to get it back in no problem.
Here’s how:
Start by lubricating the inside of the ring with a water-based lubricant. This will help the bead slide through more easily.
Next, hold the ring in one hand and use your other hand to gently push the bead into place. Once the bead is seated properly, release the pressure on the bead and make sure that it’s locked in place. If everything looks good, give yourself a pat on the back – you did it!
How Do You Put on a Captive Hoop?
There are a few different ways that you can put on a captive hoop, but the most common way is to thread the ring through your piercing and then use pliers to bend the ends of the ring together. You may need to use a little bit of force to get the ends of the ring to meet, but be careful not to overdo it or you could damage your jewelry. Once the ends are bent together, you can use a toothpick or something similar to push them flush against each other so that they stay in place.
How Do You Open And Close Captive Bead Rings?
If you’re new to body piercings, the thought of having to open and close a captive bead ring (CBR) may seem daunting. But don’t worry – it’s actually quite easy! In this blog post, we’ll walk you through the steps of opening and closing a CBR.
Opening a CBR is simple: just twist the bead away from the ring until it pops out. To close the ring, insert the bead back into place and give it a good twist until it’s snug. That’s all there is to it!
If you’re still feeling unsure, ask your piercer for help or watch a few YouTube videos on how to open and close CBRs. With a little practice, you’ll be able to do it like a pro in no time!
How to Put the Bead in a Captive Bead Ring (CBR).
Conclusion
If you’re looking to put on a captive bead ring, the first thing you need to do is make sure that your hands are clean. Next, take the ring and insert it into the piercing. Once the ring is in place, use your thumb and forefinger to hold the bead in place.
Finally, use your other hand to gently push down on the top of the bead until it snaps into place.
