There are many ways to make key chains with beads. Some people use string, while others may prefer wire. The steps below outline one way to make a key chain using beads and wire.
1. Gather your supplies. You will need beads, wire, needle nose pliers, and scissors.
2. Cut a piece of wire that is about 12 inches long.
Use the needle nose pliers to create a loop at one end of the wire. This will be the top of your key chain where the ring attaches.
3. String the beads onto the wire in the order and pattern of your choice.
Leave enough space at the other end of the wire to create another loop.
4. Once all the beads are strung on, use the needle nose pliers to create another loop at this end of the wire as well. Trim any excess wire so that both loops are about 1/2 inch long.
- Buy some keychain hardware and beads
- You can find both of these at your local craft store
- String the beads onto the keychain hardware
- Make sure that the design is pleasing to the eye and that all of the beads are secure
- Attach the keychain hardware to your keys and enjoy!
How to Make Beaded Keychains With Names
Making beaded keychains with names is a great way to personalize your keys and make them easy to identify. This project is perfect for beginners, as it only requires a few supplies and basic beading skills. Follow the steps below to create your own beaded keychain:
1. Gather your supplies. You will need beads in your desired colors, wire, wire cutters, and a key ring.
2. Cut a length of wire that will comfortably wrap around your wrist two or three times.
Leave some extra wire at the end so you can easily attach the key ring later on.
3. String the beads onto the wire in whatever pattern you like – alternating colors or all one color are both fine options. Once you’ve reached the end of the wire, make a loop so that the beads don’t fall off (see photo below).
4. Continue stringing beads until you’ve reached your desired length – this part is completely up to you! Again, make sure to finish with a loop so that the beads stay put.
How to Make a Keychain With Beads And String
Making a keychain with beads and string is a fun and easy project that anyone can do! All you need are some beads, string, and a few other supplies. Here’s what you need to get started:
-Beads (any size, shape, or color)
-String (I like to use beading thread because it’s stronger than regular sewing thread)
-Scissors
-A needle (optional)
-A key ring (or anything else you want to attach your finished keychain to)
1. Start by deciding on the pattern for your keychain.
You can string the beads in any order you like – random or symmetrical, it’s up to you! If you need some inspiration, there are lots of great bead patterns online or in craft books.
2. Cut a piece of string about 18 inches long.
This will give you plenty of room to work with without being too long.
3. Thread your needle (if using) onto the end of the string. then start adding beads onto the string, following your chosen pattern.
4. Once all of the beads are strung on, tie off the end of the string with a knot. Make sure it’s tight against the last bead so that they don’t slip off.
5. Trim any excess string from the ends and then attach your key ring (or other item) to one end using a strong knot .
Your new DIY keychain is now complete!
How to Make Silicone Bead Keychain
If you want to make a keychain that’s both unique and stylish, silicone beads are a great option. Unlike traditional metal or plastic beads, silicone has a softer, more organic feel that can add personality to any keychain. Plus, they’re easy to find and relatively inexpensive.
Here’s how to make your own silicone bead keychain:
1. Gather your supplies. You’ll need some silicone beads (available at most craft stores), a length of thin cord or string, and a key ring.
2. Decide on the pattern for your keychain. You can string the beads in any order you like, so get creative!
3. Start threading the beads onto the cord or string, following your chosen pattern.
Once all of the beads are on, tie the ends of the cord together securely. Attach the key ring to one end of the beaded cord using a strong knot.
4. Trim any excess cord from the ends of your keychain and enjoy!
How to Make Native American Beaded Keychains
Making Native American beaded keychains is a fun and easy way to show your support for Indigenous people and their culture. Plus, they make great gifts! Here’s how to make your own:
1. Choose your beads. Traditional Native American beads are made of shell, bone, or wood, but you can use any type of bead you like. Just make sure they’re all the same size so they’ll fit on the keychain ring.
2. String the beads onto thread or string, leaving about an inch at the end. Tie a knot at the end of the thread to secure the beads in place.
3. Find a small animal hide or piece of leather.
Cut a strip that’s long enough to wrap around the entire beaded portion, plus an extra inch or two on each side. Wrap it tightly around the beads and tie it off with another knot. Trim any excess leather off of the ends.
4a) If you want to add a feather or other decoration to your keychain, do so now by tying it onto one of the leather loops with thread or string. Make sure it’s securely attached before moving on to step 5!
How to Make Beaded Keychains With Tassels
Making beaded keychains with tassels is a fun and easy craft project that you can do at home. All you need are some basic supplies and a little bit of creative flair. Here’s what you need to get started:
Supplies:
-Beads (I like to use glass beads, but you can use whatever type you like)
-Key ring (You can find these at most craft stores)
-Tassel (Again, you can find these at most craft stores. I prefer the ones made of yarn or thread, but there are also options made of fabric or ribbon)
-Scissors
-Glue (optional)
Instructions:
1. Start by threading your beads onto the key ring. You can do this in any pattern or design that you like.
Just make sure that the beads are all facing the same direction so that they lay flat against the key ring when finished.
2. Once all of your beads are on the key ring, take your tassel and tie it around the top of the key chain. Make sure it’s tied securely so that your beads don’t come off while you’re wearing them.
3. Trim any excess tassel from the bottom if necessary, then enjoy your new beaded keychain!
Credit: prettylifegirls.com
What Do You Need to Make Bead Keychains?
You can make your own bead keychains using a few simple supplies. You will need:
-Beads (of various sizes, colors and shapes)
-Keychain rings (or other type of ring to thread the beads onto)
-Wire or string
-Scissors
Instructions:
1. Begin by threading your wire or string through the first bead. Then, add on as many beads as you’d like to create your design.
2. Once you’ve reached the end of your design, carefully cut the wire or string, leaving enough excess to tie a knot.
3. Make a loop at the end of the wire or string, and thread it through the keychain ring. Pull tight and knot in place.
4. Repeat steps 1-3 until you have created as many keychains as desired!
What Do I Need to Make Keychains?
There are a few things you will need in order to make keychains. First, you will need some sort of base material. This can be anything from metal to wood to plastic.
Second, you will need something to decorate your keychain with. This can be anything from paint to beads to charms. Third, you will need a way to attach your decorations to your base material.
This can be done with glue, wire, or even just threading the decorations through holes in the base material. Finally, you will need a way to attach your keychain to keys (or whatever else you want to use it for). This can be done with a split ring, lobster claw clasp, or any other type of hardware that is designed for this purpose.
With all of these supplies in hand, you are ready to start creating custom keychains!
How to Make Jewelry Keychains?
There are many ways to make keychains, but here we will focus on how to make jewelry keychains. You will need the following supplies:
-Keychain hardware (key ring, jump ring, split ring)
-Jewelry wire
-Wire cutters
-Assorted beads (optional)
1. Begin by measuring a length of jewelry wire. Cut the wire using wire cutters and set aside any excess.
2. Next, take your keychain hardware and attach it to one end of the wire.
3. If you are adding beads to your keychain, string them onto the wire now.
4. Once all beads are in place, twist the two ends of the wire together until snug. Trim off any excess wire and tuck in the end for a neat finish.
What Do I Need to Make Silicone Bead Keychains?
To make your own silicone bead keychain, you’ll need:
-Silicone beads (can be found at most craft stores)
-Key ring
-Wire or string
-Scissors
Begin by threading your wire or string through the hole in the first silicone bead.
Then, add as many beads as you’d like to create your design. Once you’re happy with the way it looks, cut off any excess wire or string and tie a knot to secure the beads in place. Finally, attach the key ring and you’re done!
how to make cute beaded keychains!! | tutorial | tiffany_studies
Conclusion
This project is perfect for summer days when you want to make something fun, but don’t want to spend a lot of time or money. All you need are some beads, key rings and jump rings – and you can make as many or as few key chains as you like. You can even get creative and use different colors and patterns of beads to create unique designs.
